I have a ton of debt, no motor, and a ton of supporting parts I need to get rid of for real this time.

I have decided that I really want a house and I just can't afford this car at this time.

Everything that I had to support my 408 is going up for sale, I can not really budge on these items since I have to pay off debt with them (yeah, the debt APE stuck me with and nothing to show for it.).

I am also putting my car up for sale.


These prices do not include S&H.
Pics available upon request.
PART - PRICE - CONDITION

[SOLD!]Callies 4" Racemaster Crank - $1500 - USED (It's been balanced, all you will need is a re-balance for your setup, nice crank though) - Pic1 Pic2

[SOLD!]ARP Head Studs - $220 - NEW

Clevite 77 - Main Bearings - $50 - NEW

[SOLD!]Dura Bond Cam Bearings - $15 - NEW (need to verify brand when I get home)

[SOLD!]LS2 Timing Chain - $35 - NEW

[SOLD!]LS1/2 lifter retainer cups(4) - $15 - NEW

[SOLD!]Gaskets - $70 for the set I will not separate - NEW
Includes:
GM LS1 Front Cover Gasket
GM LS1 Oil Pump to Pick-Up O-Ring
GM LS1 Front Main Seal
GM LS1 Rear Main Seal
GM LS1 Rear Cover Gasket
GM LS1 Water Pump Gaskets, 1999 and up (2)

[SOLD!]Comp Cams OE Replacement Hydraulic Roller Lifters, SB Chevy & LS1s. Picture - $180 - NEW

[AVAILABLE]Delphi/Lucas 42lb Injectors Balanced and flow-matched. These flow 48.8lb/hr at 58psi and will support 600-625 hp n/a at that pressure with 80% duty cycle. - $315 - NEW

[SOLD!]TNT F4 Direct Port W/LS6 manifold & stand alone fuel system - $1500 - USED
Parts included:
- LS6 Intake w/hardlines installed & painted gloss black with true flames.

- All jets
- 4 noids (2 fuel, 2 nitrous)
- Holly Black Pump
- Pressure regulator
- Russel Fuel gage
- All lines & Fittings
- 1 Jaz gallon fuel cell
- 6AN main feed line
- Nitrous filter.
- 10lb TNT bottle, bottle sticker is scratched and the handle **** is cracked ($6 fix from TNT - otherwise working)
- Kit is adjustable from 200 to 400
Only item that is missing from the kit is the bottle braket.

[SOLD!]Spec Stage 5 Clutch | Spec Billet Steel Flywheel | GM upgraded hydraulic slave won't separate - $835 - NEW(all 3 of them)

SALE PENDING - Walbro 255 lph fuel pump - $115 - NEW

[SOLD!]GM 6.0L Head Gaskets - $40 - NEW

[SOLD!]Weld 15x10 & 15x3.5 ProStars (no lugs no caps) - $375 - USED

[INQUERIES TAKEN...ppl in line since its not done yet]Ford 9" rear end - $2100 - BRAND SPANKING NEW never installed!
This is being built by DLS right now (sig) and when it's dont I will ship it out. (could be a few weeks)
- 4.11 gears (can be changed)
- TruTrac Locker (it's like a posi but MUCH stronger)
- Good for 700+hp
- Moser Center Section (BEEFY)
- Moser tubes
- Moser axles (they have holes for stock wheel studs and weld prostar studs!)
- 4 Channel (ABS & TCS) (can be 3channel)
- 31 spline
- Will bolt up to stock location! Stock drive shaft hooks up with 1350 yolk ($20)
(pics are of my friends but it's the exact same once it's done)





SALE PENDING - 1999 Black Camaro SS M6 H/C/I/LT 346 - $13,500 - USED
- Includes all current mods which can be seen on my car website in my sig.


I take Cash , check (15 day wait to clear), MO, and if you must, PayPal. I do not want to pay the fee's for PayPal so if you would like to use PayPal, you pay the fee's. You can also send an eCheck through PayPal and then there are no fee's - your choice.
All items boxed and ready to be shipped.

-Steve
PM's only please so it can be first come first serve.

 

i want the timing chain. pm sent

 

How many miles on the camaro?

 

61k, sorry about that.
-Steve

 

If the pro stars have 7.5 BS on the rears and are in good condition I want them.

 

Will you take offers on the head studs?

 

Dont mean to be nosey or anything, but what does APE stand for or mean? Dont get me wrong, anybody or thing that messes with a man's LS1 deserves to get shot.

 

$1850 on the crank I just looked on Thunders Web site new is $1599. Are you sure it's a Callies or is it a Lunati?

 

it's callies, and it's worth it. This one new is 2200 if i recall correctly.
-Steve

 

Not doughting you really I just letting you know what I found cause when I am interested in something I have to decide how much of a good deal am I getting by checking how much they are new etc... Is this one different than the one listed on Thunders web site if so do you know what the differences are? Not trying to give you a hard time as I have already decided to pass as for my duties the cheaper of the cranks will do, just wanting to know for future reference.

 

I also wanna know wha APE is.....gonna stay away from them

 

Do you happen to have ARP main studs?

 

The APE story for him is here lets keep this open for him to sell his stuff and get outta debt https://ls1tech.com/forums/racer-s-lounge/348956-depressed.html

 

dibs on the fuel pump..pm'd you

 

how streetable is the locker?

 

Sorry about what happened Steve, been reading up on the whole APE situation. TTT for ya.

 

not a locker, it's more like a posi, VERY steetable, thats why I got it, it's better than a detroit.

 

no problem man, i understand. I'll investigate the price again, but last time i checked this model was 2200 new, that was a few months back. I have since forgotten the model, lol.
I'll post more later.

 

no sorry

 

What about the wheels?