BMR Front and Rear Sway Bars !NEW IN BOX!
Bought the Front and Rear sway bars from BMR, these are the larger stiffer solid bars and are very nice 32MM front, 21 mm rear, I decided to switch up my set up a bit...I never mounted these...I just got em a week ago...come with everything in picture...Paid $330 shipped directly from BMR...
I would like $299 shipped...PM if interested !!!!THESE MUST GO!!!!!
http://i8.photobucket.com/albums/a4/...e/IMG_0033.jpg
I will split the bars up if anyone is interested....but i want to have someone who wants the front and someone who wants the rear...
front $179 shipped w. hardware
rear $169 shipped w hardware
I would like $299 shipped...PM if interested !!!!THESE MUST GO!!!!!

http://i8.photobucket.com/albums/a4/...e/IMG_0033.jpg
I will split the bars up if anyone is interested....but i want to have someone who wants the front and someone who wants the rear...
front $179 shipped w. hardware
rear $169 shipped w hardware
Last edited by erikthegoalie; Dec 8, 2005 at 07:05 AM.
OK, thanx for the reply. Size is right on rear bar - but I'm only looking for the rear bar. I already have a 35mm front/24.5mm rear bar - 24.5mm rear bar is too large.
Put me in line for rear only if you decide to seperate.
-Jay-
Put me in line for rear only if you decide to seperate.
-Jay-
Trending Topics
Well, not being as knowledgeable about suspension components and their interaction as I am with engine parts; I obviously though 'bigger is better' and went with a 25mm rear bar. Car is noticeably loose in the rear with this size.
After talking with Sam @ Strano (he actually spec'd out my shocks) he set me straight as to proper setup I need. 25mm rear bar is too large and will produce the loose condition. He stated to buy 21mm with poly bushings, or at very least, put my stock 19mm back on.
As my entire suspension is powdercoated red, I have shyed away from re-installing the stock bar thus far - just have to be careful when driving fast!
So a 21mm is what I need with the poly bushings - Sam has the 21mm hollow bar for $185 new, but I thought I might be able to pick up yours for less
After talking with Sam @ Strano (he actually spec'd out my shocks) he set me straight as to proper setup I need. 25mm rear bar is too large and will produce the loose condition. He stated to buy 21mm with poly bushings, or at very least, put my stock 19mm back on.
As my entire suspension is powdercoated red, I have shyed away from re-installing the stock bar thus far - just have to be careful when driving fast!
So a 21mm is what I need with the poly bushings - Sam has the 21mm hollow bar for $185 new, but I thought I might be able to pick up yours for less
well hang in there....keep an eye out ok...i have these listed on ebay too....if they dont sell Ill part it out
...i believe you are second in line as far as the rear bar goes....we shall see thanks bud
...i believe you are second in line as far as the rear bar goes....we shall see thanks bud
Id be interested in just the front if there is someone interested in just teh rear
thanks
ed
firebird455@gmail.com
thanks
ed
firebird455@gmail.com





