th-400 for sale
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
th-400 for sale Huhges th-400, rev manual valve body, trans brake, ect ect ect.
all good guy race parts. paid over 2k new. never missed a beat!
Asking $1,200
all good guy race parts. paid over 2k new. never missed a beat!
Asking $1,200
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
im loosing alot of weight from my car, and adding a couple hundred horse, so im going to a power glide. they seem to work beter with 3k pound cars.
there was nothing wrong with it, it never missed a beet in my car
there was nothing wrong with it, it never missed a beet in my car
Originally Posted by Noyzee
Huhges th-400, rev manual valve body, trans brake, ect ect ect.
all good guy race parts. paid over 2k new. never missed a beat!
Asking $1,200
all good guy race parts. paid over 2k new. never missed a beat!
Asking $1,200
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
NoyZEEEEEEEEEEEE........ how close are you to waldorf? I saw you at the EFA race so I think your somwhat close...
give me some info on this thing I might just take it off your hands... is the reluctor fitted.. what gear set, tail shaft, speedo, drum, sprag..etc... ready to bolt to a ls1? I actually need a th400 pretty bad
give me some info on this thing I might just take it off your hands... is the reluctor fitted.. what gear set, tail shaft, speedo, drum, sprag..etc... ready to bolt to a ls1? I actually need a th400 pretty bad
Last edited by scottyballs; Jan 27, 2006 at 08:23 AM.
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by scottyballs
NoyZEEEEEEEEEEEE........ how close are you to waldorf? I saw you at the EFA race so I think your somwhat close...
give me some info on this thing I might just take it off your hands... is the reluctor fitted.. what gear set, tail shaft, speedo, drum, sprag..etc... ready to bolt to a ls1? I actually need a th400 pretty bad
give me some info on this thing I might just take it off your hands... is the reluctor fitted.. what gear set, tail shaft, speedo, drum, sprag..etc... ready to bolt to a ls1? I actually need a th400 pretty bad
the tranny is a race preped from Huhges. im not sure on all the specifics but its all the good guy stuff. short tail shaft, the speedo i did not use, and yes, its ready to to bolt right in. add a converter and its all set.
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by scottyballs
Damn! I did not know you hauled that far for the race.. see what's the shiping going to be to 20603
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by mvonada
Noyzee - how many runs on it and would you crate it up to ship to California??
and yes, i will ship it anyplace but CA would be more $$ then the 150, probably closer to 175-200
