Racing parts for sale:
#1
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Racing parts for sale:
For Sale:
SOLD, BOXED UP, GOING OUT MONDAY OR TUESDAY- 160 lb injectors, I think they are Siemens, but I will check. Brand new. They are low impedance -- $450 + shipping firm
Used LS6 intake, rear had a few small pinholes expoxied, but I have put 21 psi through this intake with zero leakage. $275 + shipping.
SOLD, BOXED UP, GOING OUT MONDAY OR TUESDAY- Used ported/policed/powdercoated OEM TB. Powdercoated red. $50 + shipping.
SB Filter, 4" inlet, about 10 inches long (I have to measure). New. $45 + shipping.
Ported 6.0 truck heads, used, with .100 longer Manley SD valves. Come with Comp 977's and/or a set of Crane 832's. I have boosted 15-21 psi thru these heads. Flow numbers were average and nothing crazy. Heads have some marine epoxy to repair where they broke through. $600 + shipping OR $600 + cost of 3 angle valve job, and any neede work + shipping
SOLD, BOXED UP, GOING OUT MONDAY OR TUESDAY- Cobrahead transition piece, new. 5.00 high, 8.75 long, and 6.00 wide at widest part. $30 + shipping.
98 TA gauge cluster, used, $50 + shipping
SOLD, BOXED UP, GOING OUT MONDAY OR TUESDAY- Edelbrock single plane EFI intake with fuel rails, new, I see them for $377 in Jegs. I'll sell this one for $340 + shipping.
SOLD, Going out Thursday - Motorola V551 phone (Cingular)
-Used
-2 scratches on cover
-Comes with charger and sim card
-Pics here: http://psj.ls1tech.com/gallery/main....d=76&g2_page=3
$45 shipped
SOLD, BOXED UP, GOING OUT MONDAY OR TUESDAY- 160 lb injectors, I think they are Siemens, but I will check. Brand new. They are low impedance -- $450 + shipping firm
Used LS6 intake, rear had a few small pinholes expoxied, but I have put 21 psi through this intake with zero leakage. $275 + shipping.
SOLD, BOXED UP, GOING OUT MONDAY OR TUESDAY- Used ported/policed/powdercoated OEM TB. Powdercoated red. $50 + shipping.
SB Filter, 4" inlet, about 10 inches long (I have to measure). New. $45 + shipping.
Ported 6.0 truck heads, used, with .100 longer Manley SD valves. Come with Comp 977's and/or a set of Crane 832's. I have boosted 15-21 psi thru these heads. Flow numbers were average and nothing crazy. Heads have some marine epoxy to repair where they broke through. $600 + shipping OR $600 + cost of 3 angle valve job, and any neede work + shipping
SOLD, BOXED UP, GOING OUT MONDAY OR TUESDAY- Cobrahead transition piece, new. 5.00 high, 8.75 long, and 6.00 wide at widest part. $30 + shipping.
98 TA gauge cluster, used, $50 + shipping
SOLD, BOXED UP, GOING OUT MONDAY OR TUESDAY- Edelbrock single plane EFI intake with fuel rails, new, I see them for $377 in Jegs. I'll sell this one for $340 + shipping.
SOLD, Going out Thursday - Motorola V551 phone (Cingular)
-Used
-2 scratches on cover
-Comes with charger and sim card
-Pics here: http://psj.ls1tech.com/gallery/main....d=76&g2_page=3
$45 shipped
#2
LS1Tech Sponsor
iTrader: (3)
Join Date: Nov 2001
Location: Mobile, AL
Posts: 1,001
Likes: 0
Received 0 Likes
on
0 Posts
I would love nothing more in life than to re-title your post "dyno parts for sale:"
You want too much for the injectors, I'll give you $400 though... Seriously.
You want too much for the injectors, I'll give you $400 though... Seriously.
__________________
1966 Chevy II twin turbo LS3 project
2016 Z07 Carbon
1966 Chevy II twin turbo LS3 project
2016 Z07 Carbon
Trending Topics
#15
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Update:
160 lb injectors, I think they are Siemens, but I will check. Brand new. They are low impedance -- $450 + shipping firm
Used LS6 intake, rear had a few small pinholes expoxied, but I have put 21 psi through this intake with zero leakage. $275 + shipping.
SOLD Used ported/policed/powdercoated OEM TB. Powdercoated red. $100 + shipping.
SB Filter, 4" inlet, about 10 inches long (I have to measure). New. $45 + shipping.
Ported 6.0 truck heads, used, with .100 longer Manley SD valves. Come with Comp 977's and/or a set of Crane 832's. I have boosted 15-21 psi thru these heads. Flow numbers were average and nothing crazy. Heads have some marine epoxy to repair where they broke through. $600 + shipping OR $600 + cost of 3 angle valve job, and any neede work + shipping
Cobrahead transition piece, new. 5.00 high, 8.75 long, and 6.00 wide at widest part. $30 + shipping.
98 TA gauge cluster, used, $50 + shipping
SOLD Edelbrock single plane EFI intake with fuel rails, new, I see them for $377 in Jegs. I'll sell this one for $340 + shipping.
160 lb injectors, I think they are Siemens, but I will check. Brand new. They are low impedance -- $450 + shipping firm
Used LS6 intake, rear had a few small pinholes expoxied, but I have put 21 psi through this intake with zero leakage. $275 + shipping.
SOLD Used ported/policed/powdercoated OEM TB. Powdercoated red. $100 + shipping.
SB Filter, 4" inlet, about 10 inches long (I have to measure). New. $45 + shipping.
Ported 6.0 truck heads, used, with .100 longer Manley SD valves. Come with Comp 977's and/or a set of Crane 832's. I have boosted 15-21 psi thru these heads. Flow numbers were average and nothing crazy. Heads have some marine epoxy to repair where they broke through. $600 + shipping OR $600 + cost of 3 angle valve job, and any neede work + shipping
Cobrahead transition piece, new. 5.00 high, 8.75 long, and 6.00 wide at widest part. $30 + shipping.
98 TA gauge cluster, used, $50 + shipping
SOLD Edelbrock single plane EFI intake with fuel rails, new, I see them for $377 in Jegs. I'll sell this one for $340 + shipping.
#20
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Initial list updated.
Injectors: Brady M
Cobrahead: Mitch C
Intake: Steve H
TB: Might not sell, migh revise price to lower after inspecting the part and finding a chip on the top
Injectors: Brady M
Cobrahead: Mitch C
Intake: Steve H
TB: Might not sell, migh revise price to lower after inspecting the part and finding a chip on the top