I need to sell this stuff as soon as possible, i need the cash and the space...I WAS trying to sell everythign as a package deal but now it has been updated with individual prices...

Ok I was planning on using these parts to assemble a spare ls1 to possibly drop in my 85 iroc, but i lost intrest in doing that and now the parts are up for sale. I have a '01 camaro ss that i did a motor swap, and thats where most parts came from. I have someone interested but its not 100% and i need this stuff sold so basically first come first serve....Parts are all used unless otherwise noted, and parts included are....

Reasonable offers accepted. PRICES DO NOT INCLUDE SHIPPING!

$700 2004 LS1/LS6 NEW engine block SOLD
$150 2001 Crankshaft
$35 2001 connecting rods w/pistons(7 only)
$40 2000 connecting rods w/pistons(1 needs a rod bolt)
$25 LS6 rod bolts, NEW takeoffs, engine was never ran
$250 2001 complete heads (241 casting)
$200 2000 complete heads (853 casting)
$50 2001 camshaft
$40 2000 camshaft
$75 2000 lifters/pushrods/rocker arms
$75 2001 lifters/pushrods/rocker arms
$50 ignition coils (8)SOLD
$50 ignition coils (8)SOLD
$30 ignition coil mount brackets w/small harnesses SOLD
$20 ignition wires (14 or so)
$110 2000 LS1 intake manifold(not ls6)
$50 2000 valve covers SOLD
$50 2001 valve covers SOLD
$20 ls1 rear engine coverSOLD
$15 2000 ls1 valley cover
$15 2001 ls1 valley cover
$5 2000 cam timing gear
$5 2000 cam timing gear
$5 2000 cam timing chain
$5 2000 cam timing chain
$30 2000 fuel rail w/o snap ring for regulator(reg included)
$20 2000 main caps
$20 2001 main caps
$40 2000 water pump PENDING
$50 2001 water pump SOLD
$75 LS6 oil pump, NEW take-off SOLD
$25 2001 oil pump
$50 Edelbrock Shorty headersSOLD
$40 stock 2001 exhaust manifolds
$75 stock 2001 cats
$75 stock 2002 cats
$40 stock 2001 y-pipe
$75 hi-flow(not "squashed") y pipe 2001-2002
$5 stock 2000 air bellow

...plus i have assorted sensors and bolts from 2000/2001 engines
2000 LS1 engine wiring harness, may have some wires cut, nothing major though(i have to check actual condition and if application before i quote a price, i BELIEVE it is for an automatic)
__________________________________________
MORE PARTS ADDED:
LS1 stock flywheel w/stock bolts, had 10kmiles, was just resurfaced and not used since. $75
RAM HD clutch setup, disc/PP/alignment tool NEW, never even bolted up $350
LS1 PVC hose setup(NOT LS6) $15
2001 LS1 throttle body housing BARE, great to port. $20



-------------------------------------------------------------

ALSO FOR SALE>>>

NEW LS6 camshaft('03)
NEW LS6 pushrods(longer for ls6 cam w/smaller base circle)
NEW LS6 valvesprings w/seals, seats, and retainers.
(These parts were installed in a new GM crate engine but removed before engine was ever ran.)
$200



BTW, I sell on ebay under this same name, SmokingSS, and i'm also a very active member over at www.njfboa.org (New jersey f body owners association) so dont let my low post count here bother you, I stand behind everything I sell. Several members here know me personally and would vouch for me. Email me at SmokingSS@optonline.net with any questions.

I do not log on everyday so please be patient and allow me time to respond. Thank you. -paul

 

TTT

sale pending on ls6 cam setup

 

how much for the 01 pistons? they have the block coating on the skirts right?? i have one bad one, also the crank too or if you wanna sell just one of the 01 pistons and rods thats all i really need since you dont have 8 let me know

oh and is the harness for a 6 spd car and if so a price please, send a pm if you want thanx

 

interested in wiring harness, how much you want for it?

 

as of right now, i am not selling the stuff seperately. I want it all gone at once, therefore EVERYTHING for 2000.

IF i decide to part it, i will then post prices, but until then its one package deal.

 

if you do decide to sell stuff serperately, i'm interested in the blcok

 

count me down for the 01 stock rods and 7 pistons,and alll the covers and maybe the crank pm me and let me know asap

 

Price For Ls1 Center Bolts Valve Covers And The Coils Brackets For Those Covers (center Bolted). Then The S&h For Puerto Rico With Usps (regular Service); Slow But Cheaper. Will Pay With Pay Pal.

 

PM sent

 

TTT, if no buyer by tomorrow night, i'll post prices for individual parts

 

Im interested in the pcm and harness. More so the PCM

 

There is no PCM, never was

 

Interested in the harness also

 

So, are you parting out yet? If so, I'm interested in much of the engine parts.

 

im interested in 8 coil packs pm me please on price

 

TTT

individual prices have now been added. All parts are price + shipping.

Also feel free to make offers on parts, but i think the prices are pretty reasonable.

I am located near NYC, zip 07624. pickup is welcomed and i usually ship by UPS. the block will have to be shipped freight though(or ill deliver is local or i can meet if that helps)

 

PM SENT

 

sent you a pm also might still be interested in the crank too let me know i pm'ed bout 01 pistons and harness and ls6 pump paypal ready

 

TTT

list updated with sold/pending

 

How much for a set of center bolted valve covers and the coils brackets for them? How much shipped to Puerto Rico (usps zip 00680)? Are the 2000 ones center bolted? Do you have a set of coil brackets (alone, no harness) for those valve covers?