Selling for a family member:
Location: Hurst, TX

Post up what you need then I will get you a price,
a way to contact you(PMing me your phone number would be best),
and I will relay the message.

Will sell anything that is salvage-able.


Engine, Tranny, and Hood have already been sold.
Rims are somewhat bent, I think.
Here are some pictures...

 

was that your car? looks a lot lot my ta i totalled. what happened?

 

I need the two bolts/nuts and bushings that the front sway bar connects too.

 

are the headlights foggy at all?...I would be interested in them if they clear

 

grille $$? Pm sent

 

pm me if you have a interior fuse box cover!

 

Would you take the rims to a tire shop and have them perform a rim runout test?

 

pm sent..

 

Steering column w/key and body control module (and steering wheel if bag is good) Thanks
Mario

 

how much for the wheels

 

All PM's have been replied to with contact information.
Also, I do apologize...The car had 58k, not 55k on the clock.
The headlights did not looked very "fogged" either,
but almost all used headlights have some degree of haze to them.
I did take some more pictures and a break down of asking prices:

slp grill black w/red bowtie- 80
slp stb black- 80
gauge cluster 58k- 150
tail lights- 100
slp lid w/K&N, slp bellow- 100
pass side t-top- 150
2 t-top shades gray- 25
fog lights- SOLD
monsoon cd player- 100
back speakers & amp- 60
center consol lid gray- 25
fuse cover gray- 20
all ac vents gray- 75
z28 lower air box- 20
black tail light pannel- SOLD
aluminum driveshaft- 100
slp fan switch- SOLD
controls for lights and ac- 75
plastic pieces in back seat gray, sail panels w/speaker covers- 60
red optima battery- 80
head lights in perfect condition- 150
ported maf w/ sensor- 75
ls6 intake w/ egr- 275
rubber for t-tops- 25
pass door panel- 50




z28 hood- SOLD
front bumper- SOLD
turn signals, black
pass side fender
pass side door w/ glass, limo tint
rear hatch w/ glass, defroster & limo tint
rear view mirror
steering wheel, air bag deployed
complete front suspension
rear end, no tcs, 323's w/ rear brakes- SOLD
99 fuel tank- SOLD
rear bumper
high flow cats y-pipe bolt up to stock manifolds, cut out, muffler- 100
front brakes.. rotors, spindels, calipers - 300
headliner- 50
seat belts
o2 sensors

 

I would be interested in buying the front clip of the camaro if you will consider $100. All the front lights, remaining fender, and front bumper/brackets that hold the front clip on. I will come pick up. Let me know, Robbie 562-208-3851. Thanks

 

Your crazy.

 

All the wheels hold air the pass side wheels are perfect and the drivers front wheel has a little bend nothing bad at all you could probably straighten it with a piece of wood and a hammer, but the drivers rear wheel will need to be taken to a wheel shop to be straighten. I will try and take some pictures of them tomorrow.

 

all the tires hold air what type are they and tread amount?

 

Do you have the top dash pad piece?

 

haha

 

Ttt...

 

How about the T-Top Apillar covers? and complete center console..(if it's an auto car)??????? 409-291-3595

 

pm sent