Unless otherwise stated all of this stuff is brand new (I opened the boxes this morning to take pics). I have a low trader rating (quantity not quality ) on here but have plenty of friends on here that would vouch for me. One of them being JakeY2KZ and he works less then 10 feet from me. I'm getting out of the game for now so I have some great parts for sale.

All prices are + shipping and fairly firm being most of this stuff is brand new

Yank PT 4000 stall - $750
http://www.converter.cc/converters/street/GM/1/main.htm (scroll down)
This is brand new, I just pulled it out of the box this morning. This should make a great stall for a NA application. According to Dave at Yank the shift extension is too high to really use it on n2o setup.
http://img.photobucket.com/albums/v7...s/100_1213.jpg

Yank Crossmember for 4L60E w/ TA mount - PENDING
http://www.converter.cc/crossmembers/crosmembers.htm (first on page)
Brand new!
http://img.photobucket.com/albums/v7...s/100_1219.jpg
http://img.photobucket.com/albums/v7...s/100_1220.jpg

Lakewood drive shaft safety loop - PENDING
http://www.ws6project.com/user_stor/...bad276a0ffc40d
Brand new, hardware still in plastic bag.
http://img.photobucket.com/albums/v7...s/100_1244.jpg

HUMount Camaro Headunit mount - $70
(I don't think I can post the link)
This is brand new (no wait on shipping from Canada )with blue LED's.
http://img.photobucket.com/albums/v7...s/100_1221.jpg

PRC Stage 2.5 LS6 heads - SOLD to ragtop88

LG Motorsports G5X3 on 114 cam - SOLD to ragtop88

GM Performance CTS-V Lifters - SOLD to RZRSEDGE

42lb/hr Green Top injectors - SOLD to KillerD

TCI LS1 SFI Approved Flexplate - SOLD to LS1NOVA

UMI Adjustable Torque Arm w/ bolt kit - SOLD to Black02SLPSS

Sub Thump 10" Stealth box - SOLD to lookAblack98TA

Smoked Corner Lights - SOLD to blk00ss

I also have a QTP HVMC race headers ($700), Powerbond pully ($180) and 315/35/17 Nitto's ($320) for sale. I just haven't had a chance to get pics of them yet. If you are interested in any of these items PM me and I'll do my best to get you pics ASAP.

 

Were the heads milled and what size valves?

 

Yes, I forgot. The heads are milled .030 (59cc's) and the valves are 2.04"/1.575".

 

I'll take the smoked corners if they arent taken yet....

 

PM sent on the flexplate

 

Your dealing with a good guy!

Good luck on the sale, James.

 

Can you go any lower on the HUmount?

 

PM sent

 

Updated!

 

What's the largest cam that can be used with out fly cutting?

 

T-Rex last I knew....

 

Bump for some nice parts and a good seller.

 

Sending PM on heads and Cam

 

Checking on shipping for the heads and cam. Some interest in the lifters. Otherwise the list is updated.

 

Ttt

 

money sent

 

Got it, thanks!

 

Are the QTP headers used? Are they 1-3/4" or 1-7/8"? Please post some pictures up. Thanks.

 

The QTP's are brand new and 1-3/4". I haven't even pulled them out of the box yet. I will try to get pics of them up tonight if you are interested.

 

TTT