APS F-Body TT Kit (NIB), Converter (NIB), Injectors, ET Streets, ET Street Radials
Thread Starter
10 Second Club
iTrader: (18)
Joined: Aug 2002
Posts: 406
Likes: 0
From: Bloomington, IL
APS F-Body TT Kit (NIB), Converter (NIB), Injectors, ET Streets, ET Street Radials Looks like we’re going to be building a new home... so much for the Twin Turbo WS6 Convertible project 
Traded in the WS6, so I'm putting all the parts I had started pulling together up for sale, along with a few left over from my Procharged Vette. The APS kit and Fuddle converter are brand new in the box. The APS kit’s still got the black shrink wrapping intact!!
APS F- Body Twin Turbo Kit (NIB)*** SOLD to euroman ***
Brand new in the box! Never even opened!! Paid $5495 shipped during the first pre-order a few months ago. The boxes are huge, so shipping’s going to kill me. I’d be happy to include a deeper discount for local pickup!! Asking $5300 shipped; less for local pickup!!
Fuddle Racing HP/Street 3000RPM STR 2.0(NIB)
Brand new in the box! Still sealed!! Worked with John @ Fuddle directly to pick out this converter for a full weight WS6 convertible with twin turbo. When talking with John, he said the converter would flash to 3500-3700rpm in my heavy, 600+rwhp/rwtq vert. Paid $600 shipped just a few months ago. Asking $530 shipped.
Seimens 57lb Injectors *** SOLD to rv_xtreme ***
Flowmatched 57lb injectors; spec out similar to Motron 60lb’ers. I’d used them on my Procharged Vette, and they were good past 650+rwhp. Excellent condition, low mileage. I’d planned on reusing them for the twin turbo build. Asking $300 shipped.
4 - 17x9.5 Chrome SS Wheels (ZR1) *** SOLD to capt bimes ***
Aftermarket ZR1 SS wheels; couple minor scuffs on two of the wheels, otherwise excellent condition. Had planned to narrow the fronts and use them for drag wheels. Asking $375 shipped.
2 – 26x10.5x16 MT ET Streets on Firebird 5 Spoke Wheels (Painted) *** SOLD to T/A GUS ***
5 passes, 90%+ tread remaining. Asking $300 shipped.
2 – 275/40/17 MT ET Street Radials *** SOLD to MECHAM ***
5 passes, 90%+ tread remaining, worked great on my Vette! Asking $275 shipped.
Painted Valve Covers & Timing Cover
Silver hi-temp paint, look great, centerbolt valve covers. Asking $80 shipped.
Gates Laser Pulley Alignment Tool*** SOLD to JMBLOWNWS6 ***
Only used once when removing/installing Procharger setup on my Vette; worked great!! Includes case and all accessories. Asking $85 shipped.
Crane Cams Valvespring Removal/Install Tool*** SOLD to JMBLOWNWS6 ***
Used once; worked great! Asking $65 shipped.
Gates Micro-V Belt K060888
Installed, ran engine, then decided to install complete 8 rib setup. Perfect condition. Asking $15 shipped.
All prices include insured shipping via UPS/Fed Ex/USPS to the lower 48. Will gladly deduct for shipping if you're able to pick up. Accept Paypal (preferred, please include 3% to cover fees), money order, or cashier's check.
Post up or pm me with any questions! Also, please check my feedback here and on eBay (eBay username: psrutkowski).
Thanks!
Paul...
Traded in the WS6, so I'm putting all the parts I had started pulling together up for sale, along with a few left over from my Procharged Vette. The APS kit and Fuddle converter are brand new in the box. The APS kit’s still got the black shrink wrapping intact!!APS F- Body Twin Turbo Kit (NIB)*** SOLD to euroman ***
Brand new in the box! Never even opened!! Paid $5495 shipped during the first pre-order a few months ago. The boxes are huge, so shipping’s going to kill me. I’d be happy to include a deeper discount for local pickup!! Asking $5300 shipped; less for local pickup!!
Fuddle Racing HP/Street 3000RPM STR 2.0(NIB)
Brand new in the box! Still sealed!! Worked with John @ Fuddle directly to pick out this converter for a full weight WS6 convertible with twin turbo. When talking with John, he said the converter would flash to 3500-3700rpm in my heavy, 600+rwhp/rwtq vert. Paid $600 shipped just a few months ago. Asking $530 shipped.
Seimens 57lb Injectors *** SOLD to rv_xtreme ***
Flowmatched 57lb injectors; spec out similar to Motron 60lb’ers. I’d used them on my Procharged Vette, and they were good past 650+rwhp. Excellent condition, low mileage. I’d planned on reusing them for the twin turbo build. Asking $300 shipped.
4 - 17x9.5 Chrome SS Wheels (ZR1) *** SOLD to capt bimes ***
Aftermarket ZR1 SS wheels; couple minor scuffs on two of the wheels, otherwise excellent condition. Had planned to narrow the fronts and use them for drag wheels. Asking $375 shipped.
2 – 26x10.5x16 MT ET Streets on Firebird 5 Spoke Wheels (Painted) *** SOLD to T/A GUS ***
5 passes, 90%+ tread remaining. Asking $300 shipped.
2 – 275/40/17 MT ET Street Radials *** SOLD to MECHAM ***
5 passes, 90%+ tread remaining, worked great on my Vette! Asking $275 shipped.
Painted Valve Covers & Timing Cover
Silver hi-temp paint, look great, centerbolt valve covers. Asking $80 shipped.
Gates Laser Pulley Alignment Tool*** SOLD to JMBLOWNWS6 ***
Only used once when removing/installing Procharger setup on my Vette; worked great!! Includes case and all accessories. Asking $85 shipped.
Crane Cams Valvespring Removal/Install Tool*** SOLD to JMBLOWNWS6 ***
Used once; worked great! Asking $65 shipped.
Gates Micro-V Belt K060888
Installed, ran engine, then decided to install complete 8 rib setup. Perfect condition. Asking $15 shipped.
All prices include insured shipping via UPS/Fed Ex/USPS to the lower 48. Will gladly deduct for shipping if you're able to pick up. Accept Paypal (preferred, please include 3% to cover fees), money order, or cashier's check.
Post up or pm me with any questions! Also, please check my feedback here and on eBay (eBay username: psrutkowski).
Thanks!
Paul...
Last edited by 02bluess; Nov 6, 2007 at 04:14 PM.
Gates Laser Pulley Alignment Tool
Only used once when removing/installing Procharger setup on my Vette; worked great!! Includes case and all accessories. Asking $85 shipped.
Please pm me a pic of this!
Only used once when removing/installing Procharger setup on my Vette; worked great!! Includes case and all accessories. Asking $85 shipped.
Please pm me a pic of this!
Thread Starter
10 Second Club
iTrader: (18)
Joined: Aug 2002
Posts: 406
Likes: 0
From: Bloomington, IL
Thread Starter
10 Second Club
iTrader: (18)
Joined: Aug 2002
Posts: 406
Likes: 0
From: Bloomington, IL
Thanks!
Paul...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thread Starter
10 Second Club
iTrader: (18)
Joined: Aug 2002
Posts: 406
Likes: 0
From: Bloomington, IL
Pictures of the ZR1's please to edwardzb@msn.com. Thanks!
edwardzracing, I'll be sure to email you the pictures of the wheels this evening, too.
Paul...
Thread Starter
10 Second Club
iTrader: (18)
Joined: Aug 2002
Posts: 406
Likes: 0
From: Bloomington, IL
Converter's the HP/Street model, 3000 stall, built for F-Body/GTO 4L60e. Worked with John directly to get one spec'ed out for the 600+rwhp/rwtq I'd planned on making with the APS kit. Got it during John's group buy for $600 shipped. I'd planned on installing it with a full-tilt FLP 4L60e with all the bells and whistles, just never got that far...
Paul...
Paul...
Thread Starter
10 Second Club
iTrader: (18)
Joined: Aug 2002
Posts: 406
Likes: 0
From: Bloomington, IL
Pictures Added!! 
Thread Starter
10 Second Club
iTrader: (18)
Joined: Aug 2002
Posts: 406
Likes: 0
From: Bloomington, IL
All PM's returned (again) 
BTW, some more info on the converter that I forgot to add earlier...
It's a 3000rpm stall, with a 2.0 STR. While I was talking with John, he told me it should flash to 3500-3700 rpm in my heavy, TT convertible WS6 at around 600+rwhp/tq. My plan had been to put a fully built FLP 4L60e with all the bells and whistles behind it.
Paul...
BTW, some more info on the converter that I forgot to add earlier...
It's a 3000rpm stall, with a 2.0 STR. While I was talking with John, he told me it should flash to 3500-3700 rpm in my heavy, TT convertible WS6 at around 600+rwhp/tq. My plan had been to put a fully built FLP 4L60e with all the bells and whistles behind it.
Paul...