Complete LS1 Vette Motor
Thread Starter
Launching!
iTrader: (51)
Joined: Feb 2006
Posts: 216
Likes: 0
From: Port Orange/Daytona,Fl
Complete LS1 Vette Motor Hey everyone, I have a complete 2003 LS1 Vette motor with just under 11k on it. I bought it to do a swap and have gone another route. The motor will come with all front drive acc.,ie. water pump,balancer,a/c,p/s,alt. It will come with starter,corvette plastic covers for the coils, stock exh. manifolds,coils,wires,fuel rail,intake w/ elec. t-body and injectors. The motor does not have a harness or computer for it. Need to get 3200.00 for the motor plus shipping or can be picked up in the Daytona,Fl area.
Thread Starter
Launching!
iTrader: (51)
Joined: Feb 2006
Posts: 216
Likes: 0
From: Port Orange/Daytona,Fl
Trending Topics
Teching In
Joined: Nov 2007
Posts: 26
Likes: 0
From: streamwood
Hi i had a quick question is that motor out of a regular corvette or a z06 vette. If possible contact me at www.qwk_huh27@yahoo.com thanks.
Okay, a few more questions about the motor.
1) Why does it have an "elec. t-body" and do you have the cable t-body?
2) What sensors come with the motor and which ones stayed with the wiring harness (asuming it is not included)?
3) How does the motor sit of right now, meaning is it dissembled in your garage or complete and on a pallet ready for shipping? (basically need to get it in a stepside bed truck)
I am serious about buying this, just have some kinks to work out such as finding a place to store it till i go home in late December or may have to just have it shipped there but anyway, let me know thanks in advance
1) Why does it have an "elec. t-body" and do you have the cable t-body?
2) What sensors come with the motor and which ones stayed with the wiring harness (asuming it is not included)?
3) How does the motor sit of right now, meaning is it dissembled in your garage or complete and on a pallet ready for shipping? (basically need to get it in a stepside bed truck)
I am serious about buying this, just have some kinks to work out such as finding a place to store it till i go home in late December or may have to just have it shipped there but anyway, let me know thanks in advance
Thread Starter
Launching!
iTrader: (51)
Joined: Feb 2006
Posts: 216
Likes: 0
From: Port Orange/Daytona,Fl
Okay, a few more questions about the motor.
1) Why does it have an "elec. t-body" and do you have the cable t-body?
2) What sensors come with the motor and which ones stayed with the wiring harness (asuming it is not included)?
3) How does the motor sit of right now, meaning is it dissembled in your garage or complete and on a pallet ready for shipping? (basically need to get it in a stepside bed truck)
I am serious about buying this, just have some kinks to work out such as finding a place to store it till i go home in late December or may have to just have it shipped there but anyway, let me know thanks in advance
1) Why does it have an "elec. t-body" and do you have the cable t-body?
2) What sensors come with the motor and which ones stayed with the wiring harness (asuming it is not included)?
3) How does the motor sit of right now, meaning is it dissembled in your garage or complete and on a pallet ready for shipping? (basically need to get it in a stepside bed truck)
I am serious about buying this, just have some kinks to work out such as finding a place to store it till i go home in late December or may have to just have it shipped there but anyway, let me know thanks in advance
2) It has all the sensor on it i.e. Map,crank,cam,water temp., knock sensors and harness for them are there, oil press sensor for the vette, and the coil packs are on it.
3) The motor is complete and never been apart. It's sitting on my shop floor and can be easily put on a pallet and strapped to it. As for storing the motor, I can store it here if you buy it till you are ready for it.
Until the 22 of December I am in Atlanta, GA. If you would be willing to hold it till then that would make life easier for me. And as for making an offer...hows $3000 work?
p.s. would still like to see a few pictures of it, when you get a chance, just for piece of mind. Thank you
p.s. would still like to see a few pictures of it, when you get a chance, just for piece of mind. Thank you
