FS or FT vortech 03 mustang gt
#1
11 Second Club
Thread Starter
Join Date: Dec 2007
Location: Charleston, SC
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
FS or FT vortech 03 mustang gt
]PRICE REDUCED!!!!!! $12000 i need to sell it asap!!!!
its a silver mustang GT with 76.5k miles. oil has been changed every 3k miles. it has had no mechanical issues whatsoever. the car was worked on and tuned at Modular Powerhouse by the owner, tim. no body damage other than paint chips on the hood from daily driving it. interior is in great condition as well. no cracks or tears in the leather. just recently i had new brakes, and rotors all the way around put on, as well as new tie rods and a new serpentine belt. also just had new 275x40x17 tires put on the front. The car includes a unpainted cobra R hood, and a set of LT mac headers w/ a BBK shorty o/r x pipe! The car also has a new set of 03 cobra rims on it.
asking 12k
mods include:
Mongoose Vortech V2-SQ kit
MPH powerpipe
svo focus pump
42# injectors
k&n air filter
accufab t/b & plenum
o/r h pipe
SLP lm2s
3:90 gears
RAM stage 2 clutch
MGW shifter
UPR subframes (weld on)
03' Cobra rims (Chrome)
315 Nitto DRs (2 months old)
eibach pro lowering springs
5% tint
autometer cobalt guages
summit a pillar gauge pod
few more pics new and old:
http://http://www.fquick.com/garages...=2&carid=12921
its a silver mustang GT with 76.5k miles. oil has been changed every 3k miles. it has had no mechanical issues whatsoever. the car was worked on and tuned at Modular Powerhouse by the owner, tim. no body damage other than paint chips on the hood from daily driving it. interior is in great condition as well. no cracks or tears in the leather. just recently i had new brakes, and rotors all the way around put on, as well as new tie rods and a new serpentine belt. also just had new 275x40x17 tires put on the front. The car includes a unpainted cobra R hood, and a set of LT mac headers w/ a BBK shorty o/r x pipe! The car also has a new set of 03 cobra rims on it.
asking 12k
mods include:
Mongoose Vortech V2-SQ kit
MPH powerpipe
svo focus pump
42# injectors
k&n air filter
accufab t/b & plenum
o/r h pipe
SLP lm2s
3:90 gears
RAM stage 2 clutch
MGW shifter
UPR subframes (weld on)
03' Cobra rims (Chrome)
315 Nitto DRs (2 months old)
eibach pro lowering springs
5% tint
autometer cobalt guages
summit a pillar gauge pod
few more pics new and old:
http://http://www.fquick.com/garages...=2&carid=12921
Last edited by blown03mustang; 02-05-2008 at 07:21 PM.
#7
11 Second Club
Thread Starter
Join Date: Dec 2007
Location: Charleston, SC
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
modular powerhouse in atl. did all the work! actually the owner of MPH Tim did the work and tuned it himself. i dont remember the exact numbers, let me see if i can find the dyno sheet. its tuned very conservative.
i only have the 1/8 mile around here and spinnin the nitto DRs through 1st and 2nd i ran an 8.1
with some sticky tires 7s are easily attainable!
i only have the 1/8 mile around here and spinnin the nitto DRs through 1st and 2nd i ran an 8.1
with some sticky tires 7s are easily attainable!
Trending Topics
#10
Teching In
Join Date: Apr 2007
Location: north georgia
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
modular powerhouse in atl. did all the work! actually the owner of MPH Tim did the work and tuned it himself. i dont remember the exact numbers, let me see if i can find the dyno sheet. its tuned very conservative.
i only have the 1/8 mile around here and spinnin the nitto DRs through 1st and 2nd i ran an 8.1
with some sticky tires 7s are easily attainable!
i only have the 1/8 mile around here and spinnin the nitto DRs through 1st and 2nd i ran an 8.1
with some sticky tires 7s are easily attainable!
#11
11 Second Club
Thread Starter
Join Date: Dec 2007
Location: Charleston, SC
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
yea its got a Vortech V2-sq.....it made right at 400rwhp. its also got a steeda powerpipe to give it some extra psi.....im really wantin a fbody though, so somebody help me out