SLP LM1, COMP B-1 cam, 918 springs, Pushrods, DaVinci Tuner
SLP LM1, COMP B-1 cam, 918 springs, Pushrods, DaVinci Tuner Up for sale is my cam/supporting mods, still in the car but I will be pulling it out in a week or so. Drivability is amazing, no bucking at all, pulls smooth and hard. And this is all as a result of me tuning it with a Crane Cams DaVinci handheld tuner which I'm also selling.
221 / 221 .558 / .558 on a 114 LSA
Great all around street cam, tons of torque but pulls hard up top. Great DD cam! I dyno'd 380hp/372tq to the wheels with completely stock heads through a crappy old Flowmaster catback and a Moser 12 bolt with 4.10s. Would have been 400 easy on a stock rearend. My best 1/4 time was 11.8 @ 118 with stock heads.
Cam: $275 shipped OBO Pending..
918 Springs: $100 shipped OBO Pending..
Hardened Pushrods 7.4"s I believe: $55 shipped OBO Pending..
Crane Cams DaVinci tuner (for '99+): $275 shipped OBO Pending..
or
Everything for $600 shipped
SLP LM1 is used with 2K miles on it. Sounds so mean and angry but I live close to neighbors who don't like it as much as I do. the system's fit was awesome, only took me about an hour to install it. Has the split dual tips (best looking IMO) $300 shipped OBO
Buy these great parts!!!
Here are some vids of my car driving with the cam. It has the B1, headers, SLP LM1, 4.10s, UD pulley.
Startup vid:
http://s73.photobucket.com/albums/i2...nt=Startup.flv
Idle and going down the road (I missed 4th because I was too focused on the camera!):
http://s73.photobucket.com/albums/i2...=Idleandgo.flv
Givin her a little in 2nd and 3rd:
http://s73.photobucket.com/albums/i2...ent=2nd3rd.flv
3rd gear from low rpms to show the torque this cam offers:
http://s73.photobucket.com/albums/i2...=3rdlowrpm.flv
Goin through some gears and cruising in 6th at low rpm:
http://s73.photobucket.com/albums/i2...nt=6thgear.flv
221 / 221 .558 / .558 on a 114 LSA
Great all around street cam, tons of torque but pulls hard up top. Great DD cam! I dyno'd 380hp/372tq to the wheels with completely stock heads through a crappy old Flowmaster catback and a Moser 12 bolt with 4.10s. Would have been 400 easy on a stock rearend. My best 1/4 time was 11.8 @ 118 with stock heads.
Cam: $275 shipped OBO Pending..
918 Springs: $100 shipped OBO Pending..
Hardened Pushrods 7.4"s I believe: $55 shipped OBO Pending..
Crane Cams DaVinci tuner (for '99+): $275 shipped OBO Pending..
or
Everything for $600 shipped
SLP LM1 is used with 2K miles on it. Sounds so mean and angry but I live close to neighbors who don't like it as much as I do. the system's fit was awesome, only took me about an hour to install it. Has the split dual tips (best looking IMO) $300 shipped OBO
Buy these great parts!!!
Here are some vids of my car driving with the cam. It has the B1, headers, SLP LM1, 4.10s, UD pulley.
Startup vid:
http://s73.photobucket.com/albums/i2...nt=Startup.flv
Idle and going down the road (I missed 4th because I was too focused on the camera!):
http://s73.photobucket.com/albums/i2...=Idleandgo.flv
Givin her a little in 2nd and 3rd:
http://s73.photobucket.com/albums/i2...ent=2nd3rd.flv
3rd gear from low rpms to show the torque this cam offers:
http://s73.photobucket.com/albums/i2...=3rdlowrpm.flv
Goin through some gears and cruising in 6th at low rpm:
http://s73.photobucket.com/albums/i2...nt=6thgear.flv
Last edited by Mac93; Mar 2, 2008 at 02:08 PM.
