#1660 225cc Small Bore CNC Ported w/ parts 65cc chamber heads fresh out of the machine shop getting two new valves, all the seats and seals redone, and also were resurfaced. The motor blew up that the heads were on and shot some debris into the combustion chamber but I had them polished out by a professional experienced machinists. There are a few visual blemishes but they wont effect anything pm me with any other questions. The heads have approximately 6000 miles on them.
BOLT AND GO DEAL
$1900 obo + shipping
http://airflowresearch.com/225_mongoose.php
the valves have red sharpie around them from the machinist that was doing work on them



i held a stock lq9 gasket up to show where the blemishes are

here is a close look at the chamber that had the blemishes that were polished out and had two new valves

 

This is going to **** some people off but those are 2500.00 heads you can do way better than 900.00.

Just trying to help a fellow member recoup a little money.

Doug

 

Interested - please call me 702 - 539 7737

 

If everything is good I'll take them. Get me some pics. I sent you a pm before with my number. I will be up for another hour or call me in the morning.

 

if any of these fall through put me next in line!!!

 

Put me in line after "drozd ws6".

 

well i got home and saw the overwhelming response for these heads in my pm box and looked at my stupid typo......its 1900 OBO I WILL CONSIDER ANY REASONABLE OFFERS OR TRADES.

 

i feel like an idiot for my mistake guys but the heads have approx. 6000 miles on them before the machine work.

 

morning bump

 

bump for pics......

 

what is the AFR part# for these particular head? What is you bottom dollar for these heads?

 

give me an offer

 

Watch your bumps per day please.

 

what is the AFR part# for these particular head?

 

Are these small bore or large bore?

I'm In for a part# as well.

Do you have any buyer/seller feedback on any other site? Most people are hesitant about buying from a guy who has 16 posts, which may be hurtin yah.

 

no feedback but u can talk to the guy who i sold my sts kit to on here. His name is wstiles01z The part # that is on the head is #1660 and i copyed this off of afr's site....

#1660 225cc Small Bore CNC Ported w/ parts 65cc

like i said any offers will be considered cause i really have to build my motor

 

SALE PENDING

 

fffffuck

 

+1 are these sold yet

 

yes they are thanks for the interest