8-2.08 Stainless Steel Intake Valves
Thread Starter
10 Second Club
iTrader: (15)
Joined: Nov 2001
Posts: 4,519
Likes: 0
From: St. Michael, MN.
8-2.08 Stainless Steel Intake Valves I upgraded to lightweight intake valves for my AFR 225's so I have the original valves available. They were cleaned up and checked by WRE a few months ago and all them are fine. They are stainless steel, 2.08".
$40 shipped. Paypal preferred (add 3%)
$40 shipped. Paypal preferred (add 3%)
Last edited by DrkPhx; Dec 14, 2009 at 09:21 PM.
Thread Starter
10 Second Club
iTrader: (15)
Joined: Nov 2001
Posts: 4,519
Likes: 0
From: St. Michael, MN.
It is a misc Manley box. I'm pretty sure AFR uses Manley valves. I checked Manley's website and found part number 11398-8. I measured one valve and they measured almost exactly as the specs listed.
Thread Starter
10 Second Club
iTrader: (15)
Joined: Nov 2001
Posts: 4,519
Likes: 0
From: St. Michael, MN.
They are not Manley, they are REV part # CL-1172. I was measuring the diameter (.313") and I noticed the name and part # on the very tip of the valve. Sorry about that.Here's a link and info:
http://www.competitionproducts.com/p...er&sort_by=ASC
Rev, Super Duty Competition Valves, Chev LS1/6, 2.080 (int)Chev LS1/6 (Uses OEM style valve locks), 2.080 (int)
Stem: 8mm
Length: 4.915
Tip: .170
