Transmission swap parts and a LS6 intake for sale.
Thread Starter
11 Second Club
iTrader: (98)
Joined: Aug 2007
Posts: 453
Likes: 0
From: Frederick, Maryland
Transmission swap parts and a LS6 intake for sale. I have a few parts from my recent transmission swap that I don't need now.
Stock length steel drive shaft. This will work with T56's, TH350's, 4L60's, and 4L80's. It has the 1350 heavy duty U-joint in the back for a More 12 bolt of 9" rear. I am looking to get 250$ plus shipping. This cost me well over 500$ dollars to have custom made.
Hurst V-matic automatic shifter. This will work with any 3 speed automatic with a forward or standard shift pattern. It has the Hurst classic T-handle and comes with everything I got it with including the original box. I have used this for about 5 months. I would like to get 165$ shipped for this. I paid 250$ for this plus shipping brand new.
Edge 9.5" 3800 stall converter for a TH350 or TH400. This converter is great for the motor or nitrous. I bought it used with the transmission I currently have. There is nothing wrong with it, I just need a bigger stall now. I would like 250$ plus shipping. SOLD
BMR transmission cross member with the torque arm mount. This is black and has a few scratches. It will work with both TH350 and Powerglide transmissions in F-bodies. I will do 175$ plus shipping for this. This is 260$ new from BMR.
LS6 Intake with about 66,000 miles on it. This is a factory LS6 intake off my 2002 WS6. I would like 300$ plus shipping. SOLD
Stock hand ported LS1 throttle body. It is ported to 78MM and the idler wholes have been epoxied. It does have a whole in the blade to help idle with big cams. It is painted red and could used a touch up paint. 100$ plus shipping.
I will work on getting pictures for all of the parts, just give me a email address I can send them to when I get them. If you are interested please send me a PM and we can work something out. All reasonable offers with not be shot down.
Stock length steel drive shaft. This will work with T56's, TH350's, 4L60's, and 4L80's. It has the 1350 heavy duty U-joint in the back for a More 12 bolt of 9" rear. I am looking to get 250$ plus shipping. This cost me well over 500$ dollars to have custom made.
Hurst V-matic automatic shifter. This will work with any 3 speed automatic with a forward or standard shift pattern. It has the Hurst classic T-handle and comes with everything I got it with including the original box. I have used this for about 5 months. I would like to get 165$ shipped for this. I paid 250$ for this plus shipping brand new.
Edge 9.5" 3800 stall converter for a TH350 or TH400. This converter is great for the motor or nitrous. I bought it used with the transmission I currently have. There is nothing wrong with it, I just need a bigger stall now. I would like 250$ plus shipping. SOLD
BMR transmission cross member with the torque arm mount. This is black and has a few scratches. It will work with both TH350 and Powerglide transmissions in F-bodies. I will do 175$ plus shipping for this. This is 260$ new from BMR.
LS6 Intake with about 66,000 miles on it. This is a factory LS6 intake off my 2002 WS6. I would like 300$ plus shipping. SOLD
Stock hand ported LS1 throttle body. It is ported to 78MM and the idler wholes have been epoxied. It does have a whole in the blade to help idle with big cams. It is painted red and could used a touch up paint. 100$ plus shipping.
I will work on getting pictures for all of the parts, just give me a email address I can send them to when I get them. If you are interested please send me a PM and we can work something out. All reasonable offers with not be shot down.
Last edited by josh2002-ws6; Jul 9, 2008 at 10:24 PM.
