Part out 2000 Corvette body & interior

 
Thread Tools
 
Search this Thread
 
Old Jul 11, 2008 | 10:29 PM
  #1  
Oneslowz28's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Feb 2007
Posts: 86
Likes: 0
From: McHenry,IL
Default Part out 2000 Corvette body & interior

I am parting out a 2000 Corvette. I know this may not be the best place to go but i figured i would start here you never know. I orginally purchased this car for a project and all i need is the drivetrain the rest is up for sale. Since there is soooo many parts that are available it will be hard to list and price everthing. Basically the back half of the car is 100% complete tub and all.

The interior was all there except the pass. side door and seats. The drivers door will be good for parts only as you will see from pics it is smashed. the dash is all there including the HUD. All the carpet is there back hatch is mint. All the HVAC in the dash is complete. The front end is a total loss nothing is going to be usable. Ideally the rear tub and clip would be perfect for a body shop to purchase a package deal can be set up for that and would have to be picked up. For the body items they will need to be picked up everything else i should not have any problems shipping. I do accept paypal.

http://www.picturetrail.com/oneslowz28 LOOK IN ALBUM 1


Old Jul 11, 2008 | 10:40 PM
  #2  
AustinYukon's Avatar
Launching!
iTrader: (5)
 
Joined: May 2003
Posts: 299
Likes: 0
From: Austin, Texas
Default

Is it DBW? are you going to use the Gas Pedal?
Old Jul 11, 2008 | 10:42 PM
  #3  
Oneslowz28's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Feb 2007
Posts: 86
Likes: 0
From: McHenry,IL
Default

sorry i will be using the pedals and the tele steering wheel.
Old Jul 12, 2008 | 03:47 AM
  #4  
LS1C5Vette's Avatar
TECH Resident
iTrader: (11)
 
Joined: Jan 2007
Posts: 836
Likes: 0
From: Oklahoma City
Default

I cant look at the pics cause I am at work but if this is a Coupe and it has black interior then I need the long thin plastic peice that sits between the targe top and rear hatch. How much for that shipped to 73129? Also I need the clear plastic gauge cluster lens.
Old Jul 12, 2008 | 06:31 AM
  #5  
Oneslowz28's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Feb 2007
Posts: 86
Likes: 0
From: McHenry,IL
Default

The car is a traga top.
Old Jul 12, 2008 | 07:13 AM
  #6  
LS1C5Vette's Avatar
TECH Resident
iTrader: (11)
 
Joined: Jan 2007
Posts: 836
Likes: 0
From: Oklahoma City
Default

Ok then if you have a black interior I need that peice, LMK a price with paypal addy.
Old Jul 12, 2008 | 09:11 AM
  #7  
Schnell's Avatar
Launching!
20 Year Member
 
Joined: Jan 2005
Posts: 206
Likes: 0
From: Tampa
Default

Do you still have the seats? How much?
Old Jul 12, 2008 | 07:15 PM
  #8  
Oneslowz28's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Feb 2007
Posts: 86
Likes: 0
From: McHenry,IL
Default

sorry no seats.

LS1C5: I will have a price and pic for you tomorrow morning.
Old Jul 13, 2008 | 07:43 AM
  #9  
Oneslowz28's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Feb 2007
Posts: 86
Likes: 0
From: McHenry,IL
Default

Is this the piece you were talking about?




$60 shipped sound fair? Do you need any other interior parts?
Old Jul 13, 2008 | 08:50 AM
  #10  
nobreaks254's Avatar
TECH Apprentice
15 Year Member
iTrader: (50)
 
Joined: Jun 2007
Posts: 361
Likes: 1
Default

mirrors?
Old Jul 13, 2008 | 04:58 PM
  #11  
Oneslowz28's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Feb 2007
Posts: 86
Likes: 0
From: McHenry,IL
Default

I only have the drivers mirrior very good condition $70 shipped

i also have the rear view mirror with map lights for $50 shipped
Old Jul 13, 2008 | 07:58 PM
  #12  
LS1C5Vette's Avatar
TECH Resident
iTrader: (11)
 
Joined: Jan 2007
Posts: 836
Likes: 0
From: Oklahoma City
Default

Originally Posted by Oneslowz28
Is this the piece you were talking about?




$60 shipped sound fair? Do you need any other interior parts?
Yes that is, its not warped or bent anywhere is it? I sent you a pm. I could also use the gauge clutster clear plastic lens, mine is cracked. LMK Also you should list this on www.corvetteforum.com in the c5 parts section, your parts will go quick!
Old Jul 13, 2008 | 08:57 PM
  #13  
Oneslowz28's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Feb 2007
Posts: 86
Likes: 0
From: McHenry,IL
Default

I just took it off last week and it is straight.
Old Jul 13, 2008 | 09:18 PM
  #14  
AustinYukon's Avatar
Launching!
iTrader: (5)
 
Joined: May 2003
Posts: 299
Likes: 0
From: Austin, Texas
Default

Does the rear view with map lights have the compass/temp as well?
Old Jul 13, 2008 | 10:14 PM
  #15  
FiFdYnUtz's Avatar
11 Second Club
iTrader: (12)
 
Joined: May 2007
Posts: 672
Likes: 1
From: Arizona
Default

do you have he coil covers? pm me if so..thanks
Old Jul 14, 2008 | 08:07 PM
  #16  
Oneslowz28's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Feb 2007
Posts: 86
Likes: 0
From: McHenry,IL
Default

Austin- it has the maps only

FiFdYnUtz- i do have them i assum you are talking about the ones that have CORVETTE on them correct. $40 shipped they are slightly sun faded
Old Jul 14, 2008 | 10:02 PM
  #17  
LS1BLKSS's Avatar
Banned Village Idiot
iTrader: (36)
 
Joined: Aug 2007
Posts: 2,551
Likes: 1
From: Anaheim,CA
Default

i need the flip down visor pass. side if its black...
Old Jul 14, 2008 | 11:53 PM
  #18  
Oneslowz28's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Feb 2007
Posts: 86
Likes: 0
From: McHenry,IL
Default

Sorry visors are gone.
Old Jul 15, 2008 | 06:24 AM
  #19  
Oneslowz28's Avatar
Thread Starter
Staging Lane
iTrader: (6)
 
Joined: Feb 2007
Posts: 86
Likes: 0
From: McHenry,IL
Default

I also have the HUD complete for sale. bezel for dash, gauge cluster, and projector only asking $375 shipped
Old Jul 15, 2008 | 07:03 AM
  #20  
tin's Avatar
tin
Teching In
 
Joined: Jun 2008
Posts: 14
Likes: 0
From: south elgin,il
Default rear

What size rear ,im looking for a cheap 342.



All times are GMT -5. The time now is 02:20 AM.