4.3 to carbed 350
#1
4.3 to carbed 350
i have a 2001 single cab 1500 with a 4.3 that im wanting to swap for a carbed 350 with a more than mild cam. other than motor mounts, trans, electric fan. what else would i need to have a clean good swap. the 350 is going to be rebuilt fully. i may could get vortec heads and intake if it would make the swap easier.
thanks
thanks
#3
9 Second Club
iTrader: (5)
this is a shot in the dark.
Try the stock 4.3 motor mounts before you buy anything. if not then look at transdapt mounts.
Id use a stock radiator and electric fan out of a newer v8 model
trans should bolt up but you may have to get a stand alone TCU. TCI makes them
all the front accessories should bolt up to the 350, including a/c
headers. good luck no one is going to make a specific header for this swap. just gunna have to find some that will work, or some to modify.
Try the stock 4.3 motor mounts before you buy anything. if not then look at transdapt mounts.
Id use a stock radiator and electric fan out of a newer v8 model
trans should bolt up but you may have to get a stand alone TCU. TCI makes them
all the front accessories should bolt up to the 350, including a/c
headers. good luck no one is going to make a specific header for this swap. just gunna have to find some that will work, or some to modify.
#4
you will need to get a NON electronic transmission as well, that does have an electronic speedo or purchase an adapter. just a dumb question why do you want to go backwards in technology??
put a TPI 350 in it or put TPI on your 350 read this. http://forum.gmtruckcentral.com/show...T-ON-THE-CHEAP
it is awhole lot easer and nicer
put a TPI 350 in it or put TPI on your 350 read this. http://forum.gmtruckcentral.com/show...T-ON-THE-CHEAP
it is awhole lot easer and nicer
#5
you will need to get a NON electronic transmission as well, that does have an electronic speedo or purchase an adapter. just a dumb question why do you want to go backwards in technology??
put a TPI 350 in it or put TPI on your 350 read this. http://forum.gmtruckcentral.com/show...T-ON-THE-CHEAP
it is awhole lot easer and nicer
put a TPI 350 in it or put TPI on your 350 read this. http://forum.gmtruckcentral.com/show...T-ON-THE-CHEAP
it is awhole lot easer and nicer