Installing a new head unit
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: Des Plaines, IL
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Installing a new head unit
Ok so I just bought a new head unit and I would like to know what i need to do to keep my steering wheel controls funtional. I am just waiting on the humount face plate to come in and I am ready to install.
This is the head unit I bought.
http://www.bestbuy.com/site/olspage....=1216424485972
I am no wiring genius and all the wires got me very confused. Any wiring help would be greatly appreciated!
Sorry if this has been asked. I just couldnt find the answer.
This is the head unit I bought.
http://www.bestbuy.com/site/olspage....=1216424485972
I am no wiring genius and all the wires got me very confused. Any wiring help would be greatly appreciated!
Sorry if this has been asked. I just couldnt find the answer.
Last edited by 20Formula01; 09-03-2009 at 02:33 PM.
#2
Ungrounded Moderator
iTrader: (4)
The wiring is easy if you use a wiring adapter. The wiring adapter connects color to color with the wires on the head unit then the whole thing just plugs into the factory harness. You don't have to worry about which wire goes where... just connect the red wire to red, the yellow wire to yellow, etc.
Your link doesn't work - it's probably a search you did which only works for that browser session. In any case, if the head unit supports wired remote control then you need a SWI-JACK for JVC, Alpine, Clarion, and Kenwood or a SWI-PS for Pioneer and Sony. This is all in a thread just a couple above yours titled "Steering Wheel Interface Question" (imagine that ).
Your link doesn't work - it's probably a search you did which only works for that browser session. In any case, if the head unit supports wired remote control then you need a SWI-JACK for JVC, Alpine, Clarion, and Kenwood or a SWI-PS for Pioneer and Sony. This is all in a thread just a couple above yours titled "Steering Wheel Interface Question" (imagine that ).