need a little help..
#1
12 Second Club
Thread Starter
iTrader: (7)
Join Date: Jul 2003
Location: La Porte Tx
Posts: 4,613
Likes: 0
Received 0 Likes
on
0 Posts
need a little help..
I am not well versed in these things, so here it is..
I am looking at buying a set of
Infinity 1260w
Reference Series 12" 4-ohm subwoofer
* 23-400 Hz frequency response
* 100-300 watts RMS power range
What would be a good amp to push these Speakers?
I currently have a Kenwood amp pushing a set of 10" Infinity Reference 1260W,
Here are the specs
Kenwood
KAC-606 4-Channel Power Amplifier
* Max. power output 100W X 2 (4Q)
* 50W x 2 at 4Q 14.4V (0.08% THD) RMS power output
* 75W x 2 at 2Q 14.4V (0.8% THD) RMS power output
* 80Hz low pass filter for speaker tuning with Subwoofer
* Stereo / Mono / L+R channel input mode selector
Any Suggestions???
Daniel
I am looking at buying a set of
Infinity 1260w
Reference Series 12" 4-ohm subwoofer
* 23-400 Hz frequency response
* 100-300 watts RMS power range
What would be a good amp to push these Speakers?
I currently have a Kenwood amp pushing a set of 10" Infinity Reference 1260W,
Here are the specs
Kenwood
KAC-606 4-Channel Power Amplifier
* Max. power output 100W X 2 (4Q)
* 50W x 2 at 4Q 14.4V (0.08% THD) RMS power output
* 75W x 2 at 2Q 14.4V (0.8% THD) RMS power output
* 80Hz low pass filter for speaker tuning with Subwoofer
* Stereo / Mono / L+R channel input mode selector
Any Suggestions???
Daniel
#2
TECH Regular
iTrader: (2)
Join Date: Feb 2006
Location: Kenner, LA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
get a good mono block amp. That is, an amp that is ***.1 For example a good one for that would be kicker 500.1; but to help you a little better, what is your budget, what size power wire do you have now, and do you plan to change this if needed?