altenator help
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2011
Location: Holland michigan
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
altenator help
just put a new alt in on my 6.0 carb conversion. installed a 470 ohm resistor on a new plug harness (6-7 volts on L on the plug but no out put on yhe 12 volt to the batt. i had napa and autozone check the alt checked good 14.4 on there machines.Running out of time and hair.An help would be great