chaman

iTrader: (5)

Guys im looking for the part number of the little bulb that goes inside the buttons. Its a Radio Shack number. Years ago I got the number here but Im not finding it now. This is for a friend of mine, Im rebuilding his controls as I did mine.

Thanks!!

Duffster

iTrader: (103)

not 100% sure but if you search kaliente or keliante or such, she has LED threads that might help...

LS1121

iTrader: (17)

yellow sticky top of the page.

chaman

iTrader: (5)

I searched the stickied I dont want LEDS I want the stock bulb part number...

chaman

iTrader: (5)

Thanks....

I found the info and part number in another site.

LS1121

iTrader: (17)

Here is a picture of the new bulb. It is from Radio Shack: P/N 272-1092C. 2 per package. #7219 Micro Lamps. 12 Volts 60mA. Wire-terminal base.

The two lines represent the wires inside the bulb that hold the filament. at the top, how it curves to the right, that is how the bulb must point twords the bottom of the module (twords the two smaller buttons that are side by side)


This is from the yellow Stickie on the Top of the page.

chaman

iTrader: (5)

The correct one is #272-1154, not sure that info is right.