cdavis01

iTrader: (5)

I know someone who has a 03 cobra with some kinda aftermarket pulley with 15lbs of boost supposedly and dyno tuned and intake and just a catback. He just bough it about a month ago the guy he got it from said that it had 471 to the wheels and 525 to the crank. but he didng show him the dyno chart.

I have a 00T/a my mods are in the sig. What do u guys think do u think i should race him for $100

PewterScreaminMach

iTrader: (7)

Go for it, but if he can drive, you'll lose that hundred bucks . I don't know about the crank number, but the 471 to the wheels sounds pretty accurate. Those are the typical 03/04 Cobra mods - intake, exhaust, pulley, tune = 460-475 to the wheels every time.

Have you dynoed with the MS3? I'm guessing 390-410 rwhp, maybe a little more if it's a strong running car. Not enough to keep up from a roll, but since you are an auto and if he can't drive, you may be able to get him from a dig if you mark off a clear start and finish line.

Post results (and probably don't race him for money unless you like to take big risks).

cdavis01

iTrader: (5)

No i just put it in this week. He doesnt want to race unless we go from like a 50

PewterScreaminMach

iTrader: (7)

Yeah, you'll lose that one, especially if your car isn't tuned. Tell him with that extra 70 or so rwhp, he shouldn't have any trouble from a dig. It's fun to play catchup sometimes! Just run em for fun!

cdavis01

iTrader: (5)

My car has like the best tune that u can get.

PewterScreaminMach

iTrader: (7)

Cool. That's great to have a good tune on a big cam. Unfortunately, it's not going to be enough from a roll. Get him to go from a dig and you have a much better chance. Let us know how it goes!

Razorsedgepit06

Should be a pretty good run... Depending on drivers of course.

I ran a 02 SS with bolt ons/4.10's/cam/tuned from a 20 roll, and we were dead even through 4th... I had the basic pullies and such...463rwhp... Hope that helps