Using lt1 springs in a ls1 car
11-01-2009, 02:38 AM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Dec 2008
Location: cincinnati
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Using lt1 springs in a ls1 car LT1 eibach sportline springs. Im sure it will work assuming the only difference would be the spring rate of the front springs being for a heavier engine. Im just wondering if anyone has done this and does it help in not setting the car too low with lt headers. Im just curious in doing the hose mod in the rear and the lt1 springs in the front or would that still be too high in the rear with the lt1 springs in the front? Or should I just ditch the eibachs and get some BMR springs? I like the ride of the stock springs compared to the eibach and I know this because my car came with ls1 eibach sportlines on it and it was riding a bit low and I put the stock springs in it and they are much stiffer but sit soo high. I like a stiff ride since it is a sports car not a family car. Thanks.
