Problem fidning a new clamshell and bushing for stock torque arm
#1
Teching In
Thread Starter
Join Date: May 2009
Location: Wapakoneta ohio
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Problem fidning a new clamshell and bushing for stock torque arm
Hey i have a 98 z28 m6 camaro. Just recently the bolt holding the front of the torque arm to the tailshaft somehow worked its way completly out, and the torque arm looks like it went through the side of the clamshell, the side of the clamshell closest to the tranny is all jagged and busted. Im trying to find a new clamshell and bushing for it but i cant seem to find anything on where to get a new clamshell for it. All i keep seeing is the bushing part for it. Thanks for any info you can provide
#2
TECH Resident
iTrader: (24)
From my experience thats a dealer only thing man. You can get that other side of the clamshell at a local parts store but not the main side that bolts through the transmission. I think they run about 50 bucks for both pieces at the dealership. If you don't mind mail order check Scoggin Dickey.