zspot98

iTrader: (87)

I am hooking up my SJM ABS delete kit, but mine is minus the line lock. I have a 4 channel and am trying to figure out what 2 lines T and go into the bottom of the proportioning valve. Then I'm assuming the other 2 lines T and go to the line where the line lock solenoid would have been.

If anyone has a basic breakdown of what lines go where I would greatly appreciate it, since I've seem to have lost my directions.

Thanks, Mike

subhumanzz

iTrader: (46)

they are labeled on the abs block. all you need to do is look at it.

zspot98

iTrader: (87)

Don't have the ABS block, but I talked to Steve at SJM and got it figured out.

schram1124

nice kit i just put in my ride i love it ........good luck

zspot98

iTrader: (87)

It is a nice setup! This is the 2nd car I've put it on and both were great/

robsquikz28

iTrader: (246)

very far back line close to the booster is the front brake lines...hook them up to the front brake lines. Then the other line off the master which is the one closer to the front of car hook that up to the pro valve, then to the rear lines.

Very easy hope this helps