drone

iTrader: (5)

Ok so tonight I took out the abs module. Installed a proportioning valve and a linelock solenoid. I have still have the wiring for the linelock to do.

But what can I do with that big nasty ABS wiring harness. Can I yank out all of these wires? Just trace them to where they go? I also noticed wires going to the back of my rotor/hub assembly. Im guessing these are the abs sensor wires....can I yank all of these out too?

SS4Luck

iTrader: (10)

yup. trace them back as far as youd like and clip/cap or unpin then

SJMMFGINC

Make sure fuses are removed :-).

drone

iTrader: (5)

already did the fuses. what about any under the dash stuff for abs? I plan on pulling the dash soon to get rid of the rest of the A/C box thingy. maybe airbags and stuff too.

drone

iTrader: (5)

what do I do with the ones at the fuse box? can I trace out the wires on the other side of the empty fuse? or should I leave it alone?

armyboyatc

iTrader: (29)

If you really wanted to get all the wires then yea, continue to trace it back but it wouldnt be enough weight for me to worry about.