-98-Z28-Darkness-

iTrader: (7)

My 98 z28 Camaro has 62,xxx miles right now, lifted it last week to check the exhaust and noticed that most seals on my tie-rods, and ball-joints were torn, bushings have cracks on the rubber, and also my tires have been wasting on the inside.

so the next project on my car will be changing out the front suspension since i think they are original and about 14years old and California fwys are not the nicest

few questions:
is there a particular brand or would the basic autozone stuff work just fine (i don't do road-course just DD and drag sometimes)

any place were i can get a full kit with most stuff i need?
need:
control arm bushings
tie rod ends
ball joints
(missing anything else i need? changed sway bar bushings recently)

and do i need any special tools to do this at my house?
thanks

Sam Strano

iTrader: (41)

I have all that stuff. Here's a kit with everything but the tie-rods (which I also have, both inner and outer, just haven't had time to get them on the website).

http://www.stranoparts.com/partdetai...D=18&ModelID=7

Parts are also available individually.

sjsingle1

iTrader: (1)

upper ball joint is easy......lower ball joint is a PITA !!!!! and you need a press

Camaro350Z28

iTrader: (6)

strano is awesome and very helpful as well! never gone wrong there!

-98-Z28-Darkness-

iTrader: (7)

cool did not notice strano sells basic items like that...good to know

UMI Sales

iTrader: (1)

+1 on the Strano-nator

leadfoot4

iTrader: (1)

+2 on Sam's kit.

Anything less than, or cheaper than, Moog is a waste of time and money.