litch2004

iTrader: (1)

I know I have seen this in the past just can't seem to locate it now. I will be heavily modifying my car. I will be removing the factory towers and doing a tubular setup. I have seen in the past of removing the upper a-arm and running a strut spindle combo on there cars. I know this isn't a direct bolt in part making it harder to locate. Does anyone know of a strut that utilizes our lower control arm, and rotor dimensions, I will be doing a fi LS3 build and want to do this as well. Any help on locating this part is appreciated.

litch2004

iTrader: (1)

Also I'm currently running UMI rod link adj lowers and Greg Weld 15x3.5 and would like to continue doing so.

litch2004

iTrader: (1)

Bump. No one out of 105 viewers have seen this?

The Batman

iTrader: (4)

I would think that you would need 3rd gen front suspension parts to do this. I know they don't use an upper a arm

litch2004

iTrader: (1)

I'll look into that that. Haven't even thought about the third gen.

David_viny

https://ls1tech.com/forums/drag-raci...-4th-gens.html

Check that out