Bonderd

Hey Guys,
Just wondering what the stock sway bar sizes on a 99 trans am are? I can't find the info but need to know because i want to replace my bushings,thanks!

Arctic2002ss

It should be 30mm front and 19mm rear. The WS6, Firehawk, and SS have 32mm fronts.

UMI Sales

iTrader: (1)

An easy trick to verify, if you don't have a caliper available, is to use an adjustable wrench then measure that wrench opening with a tape measure or machinists rule. We do that all the time here when all the calipers seem to be missing...

libertyforall1776

iTrader: (2)

Sway Bars

RS stock is 28mm front, 15mm rear
Z/28 stock is 30mm front, 19mm rear
SS stock is 32mm front, 19mm rear
1LE SS 35mm front, 21mm rear

Strano 35mm front, 22mm rear

SSCamaro99_3

iTrader: (1)

I am almost 100% positive that that 1LE section you posted was 1993 only. They went with standard 32/19's from 1994 on.

Bonderd

Really appreciate it guys, thank you

libertyforall1776

iTrader: (2)

I was referencing the SLP 1LEs primarily, hence "1LE SS"...

i.e.:
http://www.slpregistry.com/options/1151.html

"SLP 1LE Suspension Package
This performance suspension system, now being offered exclusively by SLP, includes double adjustable Koni Shocks. (n/a on convertible or with Bilstein Suspension Package)

1LE suspension is back, and now offered exclusively by SLP. It includes Koni double adjustable front and rear shocks allowing you to "tune" your suspension to your specific handling needs. Front upper and lower control arms are tightened up with stiffer rubber bushings. Hollow 35mm front swaybar significantly reduces body roll. Includes revised endlinks, reinforced body mount brackets and firmer bushings. Rear lower control arms with firmer bushings reduce wheel hop under heavy acceleration. Larger 21mm rear swaybar and bushings decrease body roll. Package also includes Koni shock adjustment tool."