camaro brakes on mustang?
03-30-2014, 02:24 AM
#2
I haven't had my hands in a Mustang for quite a few years, but I know for a fact they will come no where near working on Fox body spindles. You would, at the very least, need SN95 spindles. 94-95 have the best bump steer geometry for use in a Fox body. The 96-04 will require you to use a bump steer kit because they lower the tie rod about an inch.
At that point, you will likely need a custom bracket to mount the caliper.
At that point, you will likely need a custom bracket to mount the caliper.