6']['9

iTrader: (2)

in which order does the endlink go. The ends of my rear sway bar are too low and the middle of the sway bar is about 3/4 higher on the rear end.

You have the Bolt, busing,washer, swaybar, metal tube etc. i think i placed something wrong, can some one post a pic so i can see what i did wrong. thanks

Cal

iTrader: (1)

Starting from the bottom of the endlink, you should have: bolt head, cup washer, rubber or poly bushing, swaybar eye, bushing, washer, spacer, washer, bushing, frame, bushing, washer, lock nut.