rear springs
09-14-2006, 09:01 AM
#1
Staging Lane
Thread Starter
Join Date: Oct 2005
Location: houston,tx
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
rear springs O.K. I want to take my prokit spring off the rear and put stock w/hose mod I tried search but not working.Whats the easiest way to do that? Also do I use 1/2 or 5/8 heater hose?
09-14-2006, 09:42 AM
#2
Jack car up.
Support under frame rails so rear end can 'hang'.
Undo the bottom of the shocks.
Remove existing prokit springs and rubber isolater.
Use 5/8 heater hose on stock springs. Spray inside with white lithium grease so it 'slides' on easier. Leave 1/2" of hose past the end of the coil.
Install new springs.
Hook shocks back up.
Enjoy!
ps - no need to remove wheels/tires to do this.
Support under frame rails so rear end can 'hang'.
Undo the bottom of the shocks.
Remove existing prokit springs and rubber isolater.
Use 5/8 heater hose on stock springs. Spray inside with white lithium grease so it 'slides' on easier. Leave 1/2" of hose past the end of the coil.
Install new springs.
Hook shocks back up.
Enjoy!
ps - no need to remove wheels/tires to do this.