White 96LT1

iTrader: (4)

I am in the market for a set of heads and a cam for my 96 LT1 Trans Am
tell me what you got

maybe some LT4 heads and a LT4 cam

Chopstix

iTrader: (1)

I have a set of GTP stage 2...LE2 flow numbers...but more port velocity


Selling heads, ported intake, comp pro mag 1.6, guide plates and fuel rail/regulator, and valve covers.

These are off me 94....heads have performed very well for me, just moving up to a set of AFR 227's

$1800obo

Pwebbz28

iTrader: (31)

Got a brand new comp cam still in the box i bought about 4 years ago for a project that never formed.

Its a SBC cam not an Lt1 cam but you can make it work. I just cant remember how. Something with the dowel pin and the opti.

PN is 12-432-8

230/236 .510 .520 110 lsa

175 shipped.

Ill send you some pics if interested.

69gto96z

iTrader: (13)

Man, dont go with the LT4 set-up, you will not be happy for long. Atleast run a CC305. I would go LE2, just my opinion though.

Ray@Nitrous Outlet

Here is a little more info on my heads

Heads:
94 Casting LT1 heads
Ported by GTP in 1999...these heads sell new for $2399 today
recent 5 angle valve job 2.00/1.56 valves
Had them flowed by Brodix they flowed 267/195...compareable to the LE2 but with more port velocity
188cc intake runner and a 48cc combustion chamber.
This will put a stock shortblock at 11.5:1 compression

Heads will come with Crane 10308 springs, Comp Pro-mag 1.6 rocker arms, guide plates and rocker studs.

Intake manifold has been ported and bored for a 58mm TB

Prefer not to seperate....will ship

Flow #'s
Intake:
134.6/45.0 .200
183.9/61.5 .300
227.9/76.2 .400
258.4/86.4 .500
266.8/89.0 .600
263.0/88.0 .700

Exhaust:
106.2/33.0 .200
140.1/43.5 .300
164.2/51.0 .400
181.9/56.5 .500
191.6/59.5 .600
194.8/60.5 .700

White 96LT1

iTrader: (4)

[QUOTE=Ray@Nitrous Outlet]Here is a little more info on my heads

Heads:
94 Casting LT1 heads
Ported by GTP in 1999...these heads sell new for $2399 today
recent 5 angle valve job 2.00/1.56 valves
Had them flowed by Brodix they flowed 267/195...compareable to the LE2 but with more port velocity
188cc intake runner and a 48cc combustion chamber.
This will put a stock shortblock at 11.5:1 compression

Heads will come with Crane 10308 springs, Comp Pro-mag 1.6 rocker arms, guide plates and rocker studs.

Intake manifold has been ported and bored for a 58mm TB

Prefer not to seperate....will ship

Flow #'s
Intake:
134.6/45.0 .200
183.9/61.5 .300
227.9/76.2 .400
258.4/86.4 .500
266.8/89.0 .600
263.0/88.0 .700

Exhaust:
106.2/33.0 .200
140.1/43.5 .300
164.2/51.0 .400
181.9/56.5 .500
191.6/59.5 .600
194.8/60.5 .700


how much? does it come with a cam? are these street friendly on pump gas?

Ray@Nitrous Outlet

$1800obo

Chopstix is my home account sorry for the confusion

They were run on a stock cubic inch motor for ~3 years then freshend up and have been run on my 12.2:1 CR 396. All on pump gas with no issues

The heads made 422rwhp with a 222/228 .544/.538 112lsa cam in the 396.

Sorry but I am not selling a cam with it...my current cam was spec'ed for the AFR heads.