Garage remodel
#1
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Mar 2004
Location: Plainfield,IL
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Garage remodel
Well since my car has been at Midwest chassis all year i thought it was a good time to update the garage a bit.
Before:
My first time doing drywall.
Here is a close up on the floor.
After:
Before:
My first time doing drywall.
Here is a close up on the floor.
After:
#7
Trending Topics
#8
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Mar 2004
Location: Plainfield,IL
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Floor is holding up just fine. I used the 2part epoxy rustoleum floor kit for garages because it's gas resistant over the industrial kit. I was on a budget otherwise i would of went with something like ucoat. I put down two coats cost about $200.00. It's all in the prep i have almost three days worth of pressure washing, filling cracks, and acid etching the floor. I also let it cure for 7 days until i put a car in there.
#12
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Mar 2004
Location: Plainfield,IL
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
No insulation no real need for it. I don't keep my car here in winter i store it elsewhere. I have a portable heater for the cold days when i have to work on the DD. Never had a problem before.