New forum - a true gearhead section!
#41
Teching In
Join Date: Mar 2011
Location: Lethbridge, AB
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Lincoln 180 at the garage, and a whole bunch of Millers at work. We can do stainless, aluminum.... You name it! I work at a heavy truck fabrication shop, I should take pictures....
Anybody here have good plans for a frame jig? Need to fab one for my 240Z
Anybody here have good plans for a frame jig? Need to fab one for my 240Z
#42
TECH Senior Member
I'm going to weld some stainless using my Sears 115V MIG welder;
other than changing to stainless wire, is there anything I need to look out for...?
What gas mixture do you guys use for stainless...?
other than changing to stainless wire, is there anything I need to look out for...?
What gas mixture do you guys use for stainless...?
#43
#44
Pro-Tools Pro105 bender
Homemade beadroller rolls beads in 16ga m/s
pexto beader
Baileigh 4' box and pan brake 14ga m/s
wynsong 3' foot shear
wynsong 2' box and pan brake
wheel and ring roller up to 2" pipe
5 ton punch and die press
Homemade beadroller rolls beads in 16ga m/s
pexto beader
Baileigh 4' box and pan brake 14ga m/s
wynsong 3' foot shear
wynsong 2' box and pan brake
wheel and ring roller up to 2" pipe
5 ton punch and die press
#45