***lsx a/c radial trans-am leather fully loaded ***
#1
TECH Fanatic
Thread Starter
Join Date: Apr 2004
Location: TOMBALL, TX
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
***lsx a/c radial trans-am leather fully loaded ***
Year: 1998
Make: Pontiac
Model: Trans Am
Price: $18000
Mileage: 90000
Private or Dealer Listing: Private Listing
Location (State): TX
Color: White
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
VERY AGGRESSIVE STANCE AND EXTREMELY CLEAN!
*NICE INTERIOR WITH LEATHER SEATS AND POWER EVERYTHING..
**RAPTOR HOOD
*WELD RTS WHEELS 15X10 WITH 4.5 BS AND 15X4 FRONT WHEELS WITH 325/15'S ON THE REAR AND MT FRONT RUNNERS UP FRONT
*AFCO FULLY ADJUSTABLE STRUTS UP FRONT WITH STRANGE ADJUSTABLE SHOCKS IN THE REAR
*WOLFE RACECRAFT FULLY ADJUSTABLE SPRINGS WITH BILLET MOUNT
*STRANGE 12 BOLT NARROWED 7 INCHES WITH 33 SPLINED AXLES AND DETROIT LOCKER
*FULLY ADJUSTABLE LOWER CONTROL ARMS
*BMR ADJUSTABLE PAN HARD BAR
*RAPTOR HIDDEN SHIFT LIGHT
*SPOHN MID MOUNTED TORQUE ARM
*BMR K-MEMBER
*BMR UPPER A-ARMS
**AM/FM/CD WITH FACTORY SPEAKERS
*CUSTOM ENGINE HARNESS WHICH DELETES UNUSED /UNNECESSARY ACCESORIES
*2002 ECM
*LS6 SHORT BLOCK WITH EPP SPEC'D COMP CAM, PORTED HEADS WITH PRC DOUBLE SPRINGS AND TITANIUM RETAINERS
*FAST 90 INTAKE WITH NICK WILLIAMS THROTTLE BODY
*KOOKS STAINLESS HEADERS AND Y-PIPE
*FRESHLY BUILT TH350 WITH MANUAL VALVEBODY/RACE CLUTCHES/SHIFT KIT
*VIGELANTE 4200RPM STALL
*MADMAN CUSTOM TRANS DIPSTICK
*UMI TH350 TUBULAR TRANS CROSS MEMBER
*STEFS SHEETMETAL TRANS PAN
*-6 AN FITTINGS AND STEEL BRAIDED TRANS COOLER HOSES WITH FRONT MOUNTED TRANS COOLER
*CUSTOM DRIVE SHAFT
******NITROUS*********
*BRAND NEW NITROUS OUTLET 90MM PLATE KIT WITH FBODY SPECIFIC NITROUS HARD LINES
*NOS NITROUS/ FUEL/PURGE SOLENOIDS
*CLEAN NITROUS SWITCH LOCATION
TEXT FOR FASTEST RESPONSE.
832-492-4375
Last edited by PAVLOCK; 08-06-2013 at 11:32 PM.
#4
Staging Lane
iTrader: (6)
Join Date: Apr 2005
Location: rochester n.y.
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
ttt
theres alot more than heads and cam man...lol. i think the price is fair for a starting point. im sure if someone was serious they would get a sweet build for a decent price. theres a desrved bump....nice nice pontiac man. whats the power n/a and juice. and how long has the motor been built. how many miles on the actual rotating assembly.
#6
TECH Fanatic
Thread Starter
Join Date: Apr 2004
Location: TOMBALL, TX
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
Car has not been down the track with this combo but another car of mine that I built for my wife had the exact setup and the car ran mid 9's riding the limiter. I have done similar/same combo on customers cars and they are all 9.6-9.9 cars.. Some with slightly smaller cams and smaller shot ran low tens.
Video below of wife's Formula.. Excuse the dirt and before it gets asked its me driving in the video and no she doesn't look like a man lol.
http://www.youtube.com/watch?v=WSAzCD77B1Q&feature=youtube_gdata_player
Video below of wife's Formula.. Excuse the dirt and before it gets asked its me driving in the video and no she doesn't look like a man lol.
http://www.youtube.com/watch?v=WSAzCD77B1Q&feature=youtube_gdata_player