Hot rod shop truck. 1987 chevy C10 shortbed 2wd
#1
Hot rod shop truck. 1987 chevy C10 shortbed 2wd
Year: 1987
Make: Chevrolet
Model: C/K 10
Price: $4999
Mileage: 61000
Private or Dealer Listing: Private Listing
Location (State): IN
Color: Black
Transmission: Automatic
Drivetrain: Rear Wheel Drive
Details:
-1987 C10 with 61,000 on the odometer but title says its not accurate so I'm guessing its 161,000?
-Has a newer GM Goodwrench 350 crate engine. Doesn't smoke or leak anything.Gets good oil pressure. Nothing crazy, 4 bolt mains.
-Mild Comp Cam
-Hooker Longtube headers heat wrapped with ball and socket flanges welded on.
-Custom 3" to 4" Y-pipe with a 4" stainless borla Xr-1 muffler dumped at rear axle. Sounds great.
-Edelbrock Performer RPM manifold, Holley 600 performance 4 barrel carb.
-1" phenolic carb spacer
Gmpp valve covers
-New plugs, Jegs black 8mm wires, new petronix HEI distributor and internals.
-Brand new Large Summit Aluminum 3 row radiator, Spahl Electric Fan on a switch.
-New coolant and 180 thermostat, billet water neck. Runs right at 180.
TH350 trans, new filter and fluid.
-B&M shift kit, B&M shifter, B&M large trans cooler
-TCI 3200-3400 stall
-Rebuilt driveshaft
-Porterbuilt tubular transmission crossmember
-stock posi rear end
-Lowered with a flip kit in the back and springs up front
-Classic industries small side mirrors and steering wheel.
-Oil pressure and water temp gauges
-All new calipers, pads, rotors, brake lines, wheel bearings up front.
-No A/C, no heat, no radio
-Molded in rear roll pan and filled bed stake holes
-Big and little rally wheels with trim rings and centercaps. 275/60/15's out back.
-2 brand new GM steel front fenders. Installed but need shimmed to line up correctly.
Issues:
Body does have minor rust, mainly just bubbling. Will need one cab corner and a small patch piece in the passenger side floor. Also needs a small fix behind rear wheel well. Big stock mirrors were removed for smaller ones so there are 3 mounting holes in each door. Needs carpet and interior work.
Also the carb has had the choke removed and milled off so it takes a couple tries to fire up when its real cold out. Fires right up when warm. Might need some other misc odds and ends but its a great cruiser shop truck. Would be a perfect LS swap project.
$4999 OR BEST OFFER! Make a reasonable offer! Open to trades
PM or email or text...
574-876-2548
Last edited by zrsnopro97; 05-29-2015 at 05:36 PM.