1990 Mazda Rx7 Convertible. LS1 V8/T-56 manual 6 spd.
#1
Staging Lane
Thread Starter
Join Date: Feb 2002
Location: Florida
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
1990 Mazda Rx7 Convertible. LS1 V8/T-56 manual 6 spd.
Year: 1990
Make: Mazda
Model: RX-7
Price: $6800
Mileage: 100000
Private or Dealer Listing: Private Listing
Location (State): FL
Color: Black
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
The 6spd manual transmission has been upgraded with steel 2 to 3 shift fork, bronze fork pads (replace plastic pads) and aftermarket South Bend Clutch DXD rated at 580 ft lbs of torque. Transmission is mounted in rear with pro-thane transmission mount. Clutch slave had been modified with external bleeder.
The convertible top, and leather seat covers have been replaced with new OEM and are in excellent condition. Speakers in seats head rest have been replaced with new kicker 3½ speakers.
*True dual 3" exhaust from LS2 exhaust manifolds with X-pipe and Magnaflow mufflers.
*Aluminum racing radiator
*Custom short throw shifter with Hurst pistol grip.
*New battery in late 2013
*Car has 18" Stern wheels and Falken Z rated tires: 265/35/18 rear and 225/40/18 front
*Walbro 255LPH Fuel pump
*Aeromotive adjustable and boost referenced FPR
*Autozone brake master cylinder
*Autozone brake booster
Things that need to be fixed:
-HVAC blower does not work.
-Wipers only work on one speed.
-No A/C or cruise control. Systems need to be completed. I have all or most of the parts.
-Could use a little body work (A few dings and a dent, and paint is faded and scratched in spots. There is a dent in the passenger door which can be easily repaired, but I am including another good door in the sale.
-Radio does not work.
-Passenger side power window is slow.
Car needs to be tuned as it runs a bit rich however car idles fine, runs and drives. Also, H.P. tuners hardware/software is included with car at asking price. I have receipts for most of the parts that were modified. Vehicle is located in Florida.
Cams (lower one is stock)
LS7 lifters (I have the original Ls1 lifters that will go with the car if interested)
I did install NEW lifter retainers and drilled the oil flow back holes slightly
853 heads:
Dual valve springs compared to stock (originals are also available to buyer):
Dual row timing chain and gears(original is available):
Last edited by C5AJ; 07-22-2015 at 09:30 PM.