Got Some Stickies!!!!!!!
#1
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Apr 2007
Location: Nor Cal
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
Got Some Stickies!!!!!!!
Well i got my skicks mounted up today they are Mickey Thompson ET Streets. 26x11.5x16. I am halfway done painting the wheels going with a new color scheme Oh ya and for all you haters I do have a stock 10 bolt and i know it is on a limited time span and it will easily blow. So there is nothing you are gonna tell me that i dont already know. So please do not post ***** my thread.
Enjoy
-Trent
Enjoy
-Trent
Trending Topics
#15
TECH Enthusiast
iTrader: (8)
Join Date: Jun 2007
Location: Toms River, NJ
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
i had the same setup, but with 16 inch firebird 5 spokes in chrome. they kidna matched my ws6 wheels.
the only that sucks is the fact that they feel like marshmallows in the rear and sway all the **** over the place, especially mixed with radials up front. bias ply and radials do not mix. just be ready to control the random back and forth pulling. they will dead hook after a good burnout at the proper tire inflation. i was down to about 11psi ~ 13 psi after burnout. have fun!
the only that sucks is the fact that they feel like marshmallows in the rear and sway all the **** over the place, especially mixed with radials up front. bias ply and radials do not mix. just be ready to control the random back and forth pulling. they will dead hook after a good burnout at the proper tire inflation. i was down to about 11psi ~ 13 psi after burnout. have fun!
#17