Anyone running a third gen rear with 5.5 bs drag wheels
#1
10 Second Club
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Olive Branch MS/Memphis
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Anyone running a third gen rear with 5.5 bs drag wheels
From what I can gather, Moser says that an 82-92 F-body rear is ~1.75 inches shorter on each end than the 4th gen rear. Does anybody have a third gen rear in a 4th gen? Do you have any pics of this.
I have always wondered how this would look with a set of 15x10's with 5.5 backspace. It seems like most guys that run this size wheel narrow their rears approximately 2" per side. The third gen rear would get you within about a 1/4" per side of that.
I have really wanted to narrow my rear and a third gen rear seems like it might work.
I have always wondered how this would look with a set of 15x10's with 5.5 backspace. It seems like most guys that run this size wheel narrow their rears approximately 2" per side. The third gen rear would get you within about a 1/4" per side of that.
I have really wanted to narrow my rear and a third gen rear seems like it might work.