Nick_Rapitis

iTrader: (15)

will 18x10.5 fit up front on a 98 z28?

bene

iTrader: (16)

With the right offset, I'm sure you can.

Nick_Rapitis

iTrader: (15)

any idea what that might be?

hyundaiboy

Yep, it fits. I think it's 56mm. Here's mine on a 98 Z28.

Nick_Rapitis

iTrader: (15)

thanks man....any BFH?

hyundaiboy

No bfh, but if the tire is too wide, it could rub on the inner sidewall at the top. There's a nut and cotter pin there to watch out for. I'm running 275 35's up front. Be mindful that the wider the tire up front, the more the steering will be affected by the ruts in the roads.

Nick_Rapitis

iTrader: (15)

im already runny 275s up front...but there wont be any rubbing with 275/35/18s up front when i turn?

hyundaiboy

I have'nt noticed any rubbing. I know with 295 35, it would rub on the plastic fender liner a little when turning.

hyundaiboy

295 35 18's on the rear. 275 35 18 up front.

Nick_Rapitis

iTrader: (15)

can you get the 315s on there in the back?

hyundaiboy

One of the other guy's on here with the same rims has 315 30 18 Falken 615's I believe. I'm pretty sure he had to BFH.

Nick_Rapitis

iTrader: (15)

sounds good...now what exactly is BFH? just smashing the inside some to make clearence?

hyundaiboy

Basically that's it. Someone just recently posted info on this and pics, but the search here is the shitz. Have'nt done it myself, it's mostly at the front of the lower wheelhouse and if you are lowered you might need to roll the quarter panel lip.

bene

iTrader: (16)

You're correct. Big ******* Hammer.