1998fanatic

My car is stock height but I literally cannot find any posts through research I've done. I've looked at the fitment guide and I'm unclear about what needs to be done if anything to get these wheels I want to fit correctly.

I want to have a square stance with 305 tires on a 10 inch wide rims that are 17 or 18 inch rims.

Does anyone know if I have to make BFH mods or spacers to get these to fit?

Thank you very much in advance.

M4N14C

iTrader: (3)

I'm running a square 315/30/18 on 11" wheels. Front's were plug and play but I had to bang on the rear fender wells and grind down the bumpstops a bit. 305's on 10" rims should fit without any other modifications.

No spacers but my wheels are made with a custom offset.

1998fanatic

What size offset did you use? Cause I'm not sure what offset I would need for the rears. Maybe a 40 or 43? Also does the front have more room for tire width than the rear?

Thanks for the help.

M4N14C

iTrader: (3)

I ran with a +40mm offset. And yes there's a lot more room in the front than in the rear when it comes to tire width.