What size drag radials for my setup?
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Jan 2011
Location: Columbus, tx
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
What size drag radials for my setup?
Ok, i am currently running 275/60r15 m/t et streets on my 2700lb 1993 s10 with 98 corvette ls1 and a built t56, nitrous and a ford 8.8 rear with 3.73s. I like the tires I have but I am in the market for a new set of m/t street s/s or street R and want to get a opinions.
15x8 wheel so im limited on width, im more asking what height.
Questions
1-street s/s or street R?
2-what size?
15x8 wheel so im limited on width, im more asking what height.
Questions
1-street s/s or street R?
2-what size?
#2
On The Tree
Thread Starter
iTrader: (3)
Join Date: Jan 2011
Location: Columbus, tx
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
I must add, I usually do street racing, occasional strip racing. Usually asphalt when im on the street. My et streets do well i spin a little but only when n20 hits. Its a "good" spin though Im still scooting right along. From a dig I do okay.
1-Question for people that have ACTUALLY HAD EXPERIENCE WITH BOTH street s/s and street R what have you noticed good or bad on street or strip with the two models of M/T drag radials from a dry road and strip.
I have heard the following.
Street R is better performance street and strip but S/S is a better all around tire if you intend on leaving them on the car.
1-
1-Question for people that have ACTUALLY HAD EXPERIENCE WITH BOTH street s/s and street R what have you noticed good or bad on street or strip with the two models of M/T drag radials from a dry road and strip.
I have heard the following.
Street R is better performance street and strip but S/S is a better all around tire if you intend on leaving them on the car.
1-