Wheels & Tires Forged | Billet | Cast | Radials | Slicks

fitting question...

Thread Tools
 
Search this Thread
 
Old 06-05-2005, 05:07 PM
  #1  
TECH Apprentice
Thread Starter
 
toofless916's Avatar
 
Join Date: Apr 2005
Posts: 339
Likes: 0
Received 0 Likes on 0 Posts
Default fitting question...

i understand that i could use search for this question but i have just ordered these wheels and i want to know as quickly as possible if these fit a 99 trans am without any issues...

There are two 17" x 9.5" wheels for the front and two 17" x 11" for the rear. They are 5-lug (5x120.65mm). The 17" x 9.5" are a +38mm offset (6.7 inch backspacing) and the 17" x 11" are a +36.5 mm offset (7.397 inch backspacing).
Old 06-06-2005, 02:32 AM
  #2  
TECH Apprentice
Thread Starter
 
toofless916's Avatar
 
Join Date: Apr 2005
Posts: 339
Likes: 0
Received 0 Likes on 0 Posts
Default

alright fine...i will figure it out later
Old 06-07-2005, 08:26 AM
  #3  
TECH Senior Member
iTrader: (2)
 
Xsta Z 28's Avatar
 
Join Date: Feb 2002
Location: Schaumburg, IL
Posts: 12,092
Likes: 0
Received 7 Likes on 7 Posts

Default

Teh nfronts will fit great, the rear they will fit on a TA, but they are at the absolute max on pushing the tire to the outer edge of the quarter lip.If you are lowered more than likely will need to roll the quarter lip.




All times are GMT -5. The time now is 02:18 AM.