Wheels & Tires Forged | Billet | Cast | Radials | Slicks

How much clearance ?

Thread Tools
 
Search this Thread
 
Old 05-26-2007, 10:02 AM
  #1  
Teching In
Thread Starter
 
xlr857's Avatar
 
Join Date: Aug 2006
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default How much clearance ?

I mounted my 18x10.5 ZO6 with 285/35 18. I had a 58mm offset. The tires clear in the rear but only by about 1/4" from the inside lip. Will that be OK. Im not sure how much the body will flex when cornering or accelerating.
Old 05-26-2007, 11:56 AM
  #2  
TECH Regular
iTrader: (1)
 
WS6WRX's Avatar
 
Join Date: Oct 2003
Location: Tampa FL
Posts: 474
Likes: 0
Received 0 Likes on 0 Posts

Default

Should be fine, take it for a spin and hit some corners hard, then take off the wheels and hammer where they rub. If they are hitting the fender lip, you'll have to roll it.




All times are GMT -5. The time now is 03:29 AM.