will 440hp get me in
Well I made 447rwhp and 403rwtq through a high stalled A4 and a 4.11 12bolt rear end. And here is my time slip.. I think you can do it.. Click on the link in my sig to see the pass.. I made 2 back to back passes and ran the same #'s
https://ls1tech.com/forums/attachmen...122mph-004.jpg
Here is the link in the 10's section.
https://ls1tech.com/forums/10-second...99-122mph.html
https://ls1tech.com/forums/attachmen...122mph-004.jpg
Here is the link in the 10's section.
https://ls1tech.com/forums/10-second...99-122mph.html
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Teching In
Joined: May 2007
Posts: 31
Likes: 0
Yea i don't see any 10 second passes with only 414tq.....i just don't think that's enough to get you in the 10's. My car has 480rwhp and 522tq and i'm just hoping to get in the 10's, which i'm not sure it's gonna happen but i think more tq is needed to get you there. Keep us updated on the times.
Yea i don't see any 10 second passes with only 414tq.....i just don't think that's enough to get you in the 10's. My car has 480rwhp and 522tq and i'm just hoping to get in the 10's, which i'm not sure it's gonna happen but i think more tq is needed to get you there. Keep us updated on the times.
chris1313 makes 422 rwhp & 380 tq & is cam only and runs 10.81 @ 122 with a 1.38 60'.......car has some weight removal.
and i will run 10.9x this year with 407 rwhp & 380 tq.( i might have picked up a horse or two this year from the new lid & maf)
my best last year was 11.08 @ 121 with a 1.48 60' full weight .......
we just ditched the front & rear impact bars,rear seats & put on a 85 mm lid & 85 mm maf so i think 10.9x are possible......................
Staging Lane
Joined: Jun 2008
Posts: 70
Likes: 0
From: Burford Ontario
2000 camaro Z28 LS1 348, trick flow 215's, 92mm TB,42 lb injectors,fuddle 4800 stall, 9'' with 4.10's.........Makes 417 rwhp
3300 race ready.
60' 1.519
330 4.455
1/8 6.910
MPH 99.25
1000 9.057
1/4 10.879
MPH 126.35
This year Looking to lose 200 LBs.........new k member,strange brakes,relocate battery,
losing ABS ****,carbonfiber Joe van -o front cover, etc.
Next year 800 HP SB-2 engine........Hoping to see some 9.50's
Tony
3300 race ready.
60' 1.519
330 4.455
1/8 6.910
MPH 99.25
1000 9.057
1/4 10.879
MPH 126.35
This year Looking to lose 200 LBs.........new k member,strange brakes,relocate battery,
losing ABS ****,carbonfiber Joe van -o front cover, etc.
Next year 800 HP SB-2 engine........Hoping to see some 9.50's
Tony
Last edited by slooter; Mar 4, 2009 at 10:20 AM.
a friend of mine is cutting 1.4x 60's in his 6speed on a 275 50 15 M/T drag radial. people are going faster than ever on DRs these days
So what I'm seeing from most post is the gears being 410s. I know that say 3:42's are going to be slower on the motor but how much slower with the same set up as the OP's in a full weight car?
if it was an auto it would be quicker but it would suffer on the street so it stayes a 6sp for now just to see what i can get out of it then ill go auto latter have to have another kool ride to ride around in first,maybe a vette for cruising.
