going to the track
Thread Starter
TECH Apprentice
iTrader: (30)
Joined: Apr 2007
Posts: 321
Likes: 0
From: milton florida
going to the track i havent been to the track in a while and hoping to run 10's
current mods are..typhoon intake and 85mm Tb,Mac headers,ory,with electric cut outs,underdrive pulley, cam ( 598 lift 232 236 dur 112 lsa. i gasket matched the stock heads and cleaned them up alittle while i was doing the cam swop..
tunnle mount torque arm,300lb QA1 front springs,LCA and brackets, comp engineering rear shocks,3500 stall ,oh ya and a 100shot wet kit..im sure there is a few little things i left out. im running on ET streets..thelast timei was at the track with bolt ons and a stall untuned i ran a 7.9 in the 1/8..think i will be in the 10's?
current mods are..typhoon intake and 85mm Tb,Mac headers,ory,with electric cut outs,underdrive pulley, cam ( 598 lift 232 236 dur 112 lsa. i gasket matched the stock heads and cleaned them up alittle while i was doing the cam swop..
tunnle mount torque arm,300lb QA1 front springs,LCA and brackets, comp engineering rear shocks,3500 stall ,oh ya and a 100shot wet kit..im sure there is a few little things i left out. im running on ET streets..thelast timei was at the track with bolt ons and a stall untuned i ran a 7.9 in the 1/8..think i will be in the 10's?
i havent been to the track in a while and hoping to run 10's
current mods are..typhoon intake and 85mm Tb,Mac headers,ory,with electric cut outs,underdrive pulley, cam ( 598 lift 232 236 dur 112 lsa. i gasket matched the stock heads and cleaned them up alittle while i was doing the cam swop..
tunnle mount torque arm,300lb QA1 front springs,LCA and brackets, comp engineering rear shocks,3500 stall ,oh ya and a 100shot wet kit..im sure there is a few little things i left out. im running on ET streets..thelast timei was at the track with bolt ons and a stall untuned i ran a 7.9 in the 1/8..think i will be in the 10's?
current mods are..typhoon intake and 85mm Tb,Mac headers,ory,with electric cut outs,underdrive pulley, cam ( 598 lift 232 236 dur 112 lsa. i gasket matched the stock heads and cleaned them up alittle while i was doing the cam swop..
tunnle mount torque arm,300lb QA1 front springs,LCA and brackets, comp engineering rear shocks,3500 stall ,oh ya and a 100shot wet kit..im sure there is a few little things i left out. im running on ET streets..thelast timei was at the track with bolt ons and a stall untuned i ran a 7.9 in the 1/8..think i will be in the 10's?
