11 Second Club Snake eyes are a good thing

11's first time out

Thread Tools
 
Search this Thread
 
Old Sep 23, 2009 | 02:31 PM
  #21  
DTB_LS1's Avatar
10 Second Club
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (2)
 
Joined: Aug 2005
Posts: 956
Likes: 0
From: Ottawa, IL
Default

Originally Posted by dmart
How's your t56 treating ya? Synchros in mine are starting to get bad. Trying to decide if I should just do a standard rebuild or faceplate it. I'm losing a lot of time on my shifts ;[
When I rebuilt mine I just had Sixspeedinc do a level 2. Which is suppose to be good to 700rwhp. I had a buddy that had a faceplated t56 and it banged gears like a champ at the track but it wasn't very street friendly at all.
Reply
Old Sep 23, 2009 | 02:37 PM
  #22  
dmart's Avatar
Thread Starter
11 Second Club
iTrader: (3)
 
Joined: Dec 2005
Posts: 281
Likes: 0
From: St Paul, MN
Default

Originally Posted by DTB_LS1
When I rebuilt mine I just had Sixspeedinc do a level 2. Which is suppose to be good to 700rwhp. I had a buddy that had a faceplated t56 and it banged gears like a champ at the track but it wasn't very street friendly at all.
I say f the street! I probably only have 1500 miles on it this entire season, 200+ of those are going to/from the strip. Thinking this is a street car is making me make compromises (trutrac vs spool, medium cam vs big cam etc), I'm done with all that noise.
Reply
Old Sep 23, 2009 | 03:59 PM
  #23  
TORCHD 02 TA's Avatar
TECH Senior Member
iTrader: (39)
 
Joined: May 2006
Posts: 7,883
Likes: 3
From: Chicago
Default

Originally Posted by dmart
What was the DA?

I'd rather overtire the car than undertire it, plus I plan on either a big h/c setup or a stroker if the motor lets go. If I go with a 26" I won't have enough gear on the big end. But you are right it's too much tire, leaving on the limiter it was bogging Thinking I'll tighten up the front a bit (was pulling them) and put a couple psi back in there. Perhaps bump up the limiter to 6800 judging by where you make your power.

I'm going back this weekend with some changes, wanna go 11.4x or break it trying.

Any idea what your car weighs?
The DA when I ran was at 4XX, I cannot remember but I know it was +4xx..

Here is my car in "race mode". Add 200 lbs for driver

Reply
Old Sep 23, 2009 | 04:06 PM
  #24  
dmart's Avatar
Thread Starter
11 Second Club
iTrader: (3)
 
Joined: Dec 2005
Posts: 281
Likes: 0
From: St Paul, MN
Default

Originally Posted by TORCHD 02 TA
The DA when I ran was at 4XX, I cannot remember but I know it was +4xx..

Here is my car in "race mode". Add 200 lbs for driver
400 id be happy with 1400

car looks good
Reply




All times are GMT -5. The time now is 07:57 PM.