What will I run with this setup
I have a cam only set up with bolt on's here's the list
ls6 long block
vindicator cam 240/244 608/596 112 lsa
EWP
90/90 intake ported by vengeance's
powerbond u/d pulley
SLP header's and off road y with slp cat back
Ngk IX 55 plug's need to install 6's
stock rockers
stock injector's
K&N cold intake
slp maf
Stock rear 3.42
M6 car
It put down what i think is a really good # for running out of injector at about 5500rpm. plus the plug's are kinda hot going to 6's and my maf blows the big one . So all said and done Mike at Straightline Performance was able to get me 420rwhp and 387 torque on a mustang dyno. I was very happy. So now i am going to get on phone with mike and get some injectors and plug's and a maf and mybe some headers that really flow . So tell me what you guys think. I think i did really well for the stock injectors : And one more plug for Mike at Straightline Performance and crew there great guys and hope to see them in about another few weeks for my retune with the goods

