Need Opinions Please
Need Opinions Please Well I'm trying to break into the 11's this season with a gear'd stock internal WS6. My mods are as follows:
SLP LT's w/ catted Y
SLP LM
SLP Lid and Cold Air w/ smooth bellows
Fast 92/92
4.10's w/ Auburn Posi Moser Axles and Mac Girdle(10 bolt)
160 stat
MSD Coil Packs
MT 26x10x15's w/ 22x3.5x15 in front
Centerforce Dual Friction and billet steel flywheel
batery relocation kit
Spohn LCA TA SFC PHB
QA1 Rear Coilovers with QA1 R front shocks
TB bypass
and most important....the driver mod.
I aslo removed the following:
AIR Pump
Rear Seat Belts
Spare Tire and Jack
Let me know what you think....if it's even possible with my mods....all input would be great.....and give me your opinions on what my setup should run....and I'm not trying to do any bench racing....just to know what I should be aiming for....
SLP LT's w/ catted Y
SLP LM
SLP Lid and Cold Air w/ smooth bellows
Fast 92/92
4.10's w/ Auburn Posi Moser Axles and Mac Girdle(10 bolt)
160 stat
MSD Coil Packs
MT 26x10x15's w/ 22x3.5x15 in front
Centerforce Dual Friction and billet steel flywheel
batery relocation kit
Spohn LCA TA SFC PHB
QA1 Rear Coilovers with QA1 R front shocks
TB bypass
and most important....the driver mod.
I aslo removed the following:
AIR Pump
Rear Seat Belts
Spare Tire and Jack
Let me know what you think....if it's even possible with my mods....all input would be great.....and give me your opinions on what my setup should run....and I'm not trying to do any bench racing....just to know what I should be aiming for....
Last edited by Zero4488; May 31, 2008 at 12:56 PM.
What kind of 60's are you/your setup capable of Zero? What are you normally trapping? Honestly, I think you're going to have trouble getting 11s full weight unless your car is abnormally strong. Doable, though.
I have to agree with 95 Z28. I think it will be hard to take a M6 with those mods into the 11's in a almost full weight car. I would say yes if it was a A3 or A4 car in a heartbeat, but very hard for a M6 car.
