In the 12's on a G-Tech SS meter
Thread Starter
Teching In
Joined: Apr 2009
Posts: 49
Likes: 0
In the 12's on a G-Tech SS meter I'am in the 12's now according to my g-tech ss meter. In the summer I went to a drag strip and ran 13.68. wasn't to happy with that time but I spun through 1st and 2nd real bad. Anyway I bought a g-tech meter to practice launching and shifting and today I managed to get a 12.92 I don't know how accurate they are but I think they are worth the money. I think some drag radials would bring the times down. Here is what I got.
60' 2.24
330' 5.73
1/8 8.54 @ 90.06
1000' 10.91
1/4 12.92 @ 111.41
horsepower on the meter said 378hp 370tq. does this sound about right? What do you guys think? mods are in signature. Thanks
60' 2.24
330' 5.73
1/8 8.54 @ 90.06
1000' 10.91
1/4 12.92 @ 111.41
horsepower on the meter said 378hp 370tq. does this sound about right? What do you guys think? mods are in signature. Thanks
I have a G-Tech from 1993 that has been VERY accurate since day 1, i most likely have not only the oldest 1st gen model but prolly the only one left alive! main thing to understand with the G-TECH is that it must be calibrated to -0- representing "level operation" the MPH on the meter will read 5 mph fast since the timer works off of inertia not having to break a beam...very satisfied with my G-TECH
As for your ET my buddy has a hott cammed Ls1,2800 stall,3.42 gears,DRs, Lts and a half-assed tune he ran 12.87 107.58 at 3000' DA car runs very nice and for sure it would run MUCH faster with a 4k stall
As for your ET my buddy has a hott cammed Ls1,2800 stall,3.42 gears,DRs, Lts and a half-assed tune he ran 12.87 107.58 at 3000' DA car runs very nice and for sure it would run MUCH faster with a 4k stall
http://www.gtechpro.com/test.html
I hope its not as crazy as the "test" unit on the site...lol
7.04 1/4 mile @ 169.3
2.98 second 60'
193hp
185 lb feet of torque...
Is this on a bicycle with 0 weight??
and it only pulled 1.08 G's in acceleration?
LOL
I hope its not as crazy as the "test" unit on the site...lol
7.04 1/4 mile @ 169.3
2.98 second 60'
193hp
185 lb feet of torque...
Is this on a bicycle with 0 weight??
and it only pulled 1.08 G's in acceleration?
LOL
12 Second Club
Joined: Sep 2007
Posts: 19
Likes: 0
http://www.gtechpro.com/test.html
I hope its not as crazy as the "test" unit on the site...lol
7.04 1/4 mile @ 169.3
2.98 second 60'
193hp
185 lb feet of torque...
Is this on a bicycle with 0 weight??
and it only pulled 1.08 G's in acceleration?
LOL
I hope its not as crazy as the "test" unit on the site...lol
7.04 1/4 mile @ 169.3
2.98 second 60'
193hp
185 lb feet of torque...
Is this on a bicycle with 0 weight??
and it only pulled 1.08 G's in acceleration?
LOL
Must be a typo or something! My G-Tech was used at the track the first time out. I ran 12.6@116 and the G-Tech showed 12.59-12.61@120-121 and has been very accurate since 1993.
All i can suggest is, for you to read the booklet
All i can suggest is, for you to read the booklet
Trending Topics
I can also verify that the gtech is accurate. Fwiw I ran 13.81 in my regal gs at the track this fall. On the gtech(1st gen model aswell lol) I ran a 13.75 the same day. My z28 in sig runs consistent 12.5- 12.6's @117 (na) on the gtech, thats spinning too,(4.6, 0-60)...I also agree that the mph reads +5.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
